hi beier team
when i use my engine start cold or warm i can not change the sound volume
for the lenght of the soundfile
if i adjust it during the playing of the start soundfile
the the sound is then changed when the start soundfile is finnised playing
there is also a little hickup in the sound about 3 seconds after every volume adjustmend
i used sound adjustmend on the stick function (ekmfa) in positon static on prop channel 2
volume + on position a
volume - on position d
i hope you can do something with this information
gr marco polo
adjustmend sound volume
- marco polo
- Beiträge: 92
- Registriert: Di 26. Okt 2010, 20:45
- Wohnort: holland
- Kontaktdaten:
adjustmend sound volume
groeten uit Nederland,
Niets is zeker, en zelfs dat niet.
Niets is zeker, en zelfs dat niet.
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: adjustmend sound volume
The volume adjustment during the startsound is fixed with the Sound-Teacher V1.00i.
The little hickup after a few seconds... In this moment, the module is saving the new volume setting onto the SD card. This takes a few ms and while this time the modul can't read new sounds from the card...
Your ears are too good for this module
The little hickup after a few seconds... In this moment, the module is saving the new volume setting onto the SD card. This takes a few ms and while this time the modul can't read new sounds from the card...
Your ears are too good for this module
- marco polo
- Beiträge: 92
- Registriert: Di 26. Okt 2010, 20:45
- Wohnort: holland
- Kontaktdaten:
Re: adjustmend sound volume
thanks for the explane of the hickup
and yes the adjustmed is fixed with version v1.00i
thanks again
marco polo
and yes the adjustmed is fixed with version v1.00i
thanks again
marco polo
groeten uit Nederland,
Niets is zeker, en zelfs dat niet.
Niets is zeker, en zelfs dat niet.