Just got a USM -RC-2 for my first Tamiya 1/14th truck.
I am totally new to the RC hobby and electronics.
I have been able to get software loaded and some sounds imported and the module powered up.
I connected esc and RX to module at X2/1.
I do not know how I connect the steering servo? I want the winkers/indicators to function when I steer .
What is the correct way to set up the steering servo with the module?
thank you
Newb of help with steering servo
Re: Newb of help with steering servo
Connect the channel of the receiver where the steering servo would normally be connected to the USM at X2/2. Then connect the steering servo to the USM at X2/2, too.
In Configuration > Proportional Channels > Prop #2 you configure the areas A and D under "In position (static)" with the functions "Indicator left" and "Indicator right" respectively.
You can extend the areas by using the slider (blue square) and drag them closer to the neutral position if needed.
If the indicator is reversed (i.e. you turn left but the right indicators comes on and vice versa) just swap the functions under A and D.
In Configuration > Proportional Channels > Prop #2 you configure the areas A and D under "In position (static)" with the functions "Indicator left" and "Indicator right" respectively.
You can extend the areas by using the slider (blue square) and drag them closer to the neutral position if needed.
If the indicator is reversed (i.e. you turn left but the right indicators comes on and vice versa) just swap the functions under A and D.
Re: Newb of help with steering servo
Rascal, Many thanks for the info.
Sorry if it was a basic thing BUT radio control and electronics are new to me.
Wanted a land based RC hobby BUT not fast stuff,hence the 1/14th truck.
I have no local clubs that cater for trucks or other likewise modellers.
I could of got a much simpler Tamiya sound/light unit BUT when I heard a tank and truck in the shop they were identical and not realistic.
But I think buying this Beier unit might have been beyond my skill set.
Rascal will you keep a look out please in case I post again? A lot of the members here look to be German, I presume you are English.
Sorry if it was a basic thing BUT radio control and electronics are new to me.
Wanted a land based RC hobby BUT not fast stuff,hence the 1/14th truck.
I have no local clubs that cater for trucks or other likewise modellers.
I could of got a much simpler Tamiya sound/light unit BUT when I heard a tank and truck in the shop they were identical and not realistic.
But I think buying this Beier unit might have been beyond my skill set.
Rascal will you keep a look out please in case I post again? A lot of the members here look to be German, I presume you are English.
Re: Newb of help with steering servo
Don't worry, at first it can be a bit overwhelming but once you get the hang of it I think it isn't that difficult.Gazzalene hat geschrieben:But I think buying this Beier unit might have been beyond my skill set.
There are some tutorials on Youtube that might help to get started; they are in Geman but you can activate the English subtitles. Start here: Soundmodul USM-RC-2 Tutorial 01
Sure, I will be around and look out for your posts, and I am actually German.Rascal will you keep a look out please in case I post again? A lot of the members here look to be German, I presume you are English.