A genius transmitter
Verfasst: Sa 14. Mär 2015, 15:59
I have set up a FrSKY Taranis PLUS with OpenTX to be used with USM-RC-2.
The nice thing is that the transmitter can be programmed to allmost everything.
With using the EKMFA on channel 3 in Soundteacher you can control much more functions with one channel, but it is not easy to stand and count every time.
In OpenTX I have programmed the switches on the transmitter to send different counts off impulses, and with a little playing and testing it came to work.
That way I now can control much more with the switches:
SA up = Lights +
SA down = Lights -
SB up = Hazard
SB down = Front fog lights
SC up = Engine sound on/off
SC down = Sequence 1
SD ud = WAV-player on/off
SD down = WAV-player next
and while I am using a Servonaut E20 I have made it so the left stick right/left will turn on the indicators to right or left, but only then the throttle is not at the button, that is used to switch forward or backwards.
I have also made channel 4 on the Beier to be controlled with:
SH = Headlight flasher
SF = HornSchleife
SE up/down = IR Servo 2 up/down
IR Servo 1 are controlled directly with channnel 1
Must say that the idea was not mine, a have just adapted it to my model.
The nice thing is that the transmitter can be programmed to allmost everything.
With using the EKMFA on channel 3 in Soundteacher you can control much more functions with one channel, but it is not easy to stand and count every time.
In OpenTX I have programmed the switches on the transmitter to send different counts off impulses, and with a little playing and testing it came to work.
That way I now can control much more with the switches:
SA up = Lights +
SA down = Lights -
SB up = Hazard
SB down = Front fog lights
SC up = Engine sound on/off
SC down = Sequence 1
SD ud = WAV-player on/off
SD down = WAV-player next
and while I am using a Servonaut E20 I have made it so the left stick right/left will turn on the indicators to right or left, but only then the throttle is not at the button, that is used to switch forward or backwards.
I have also made channel 4 on the Beier to be controlled with:
SH = Headlight flasher
SF = HornSchleife
SE up/down = IR Servo 2 up/down
IR Servo 1 are controlled directly with channnel 1
Must say that the idea was not mine, a have just adapted it to my model.