Seite 1 von 1

US and standard indicator lights

Verfasst: Mi 18. Feb 2015, 18:55
von Phil13
Hello all,

New here and don't speak German :oops: . I will order RC2 module in few to equip an US Tamiya's truck.
I should need US mode for turn/Parking lights for back of the truck and trailer leds but I need also the "European mode" for orange leds in front of truck that remains off when parking lights are on.

I saw that US mode has to be validated on right side of the output menu of soft, I suppose it should be for all turning lights.
Does software allows mix on turning lights output please? I mean 2US mode AND 2 EU mode on left side choice of the menu?

Thanks in advance
Philippe

Re: US and standard indicator lights

Verfasst: Mi 18. Feb 2015, 20:39
von Leonard
Yes, you can mix it as you like it.
The only drawback is that you will have to use 2 outputs to the indicators in front as normal and 2 other outputs as combined rear/indicators at the rear end.
You can also choose to have the US-style rear, where you have indicator, parkinglight and brake light on the same output.
Combine that with US-style indicators on the front fenders where you have parkinglight and indicators on the same output or with only indicators, thats all up to you.

Re: US and standard indicator lights

Verfasst: Mi 18. Feb 2015, 20:57
von Phil13
Hi Leonard,

Ok, many thanks for this precision, sad to use 4 outputs, but it will be more realistic.
Leonard hat geschrieben:You can also choose to have the US-style rear, where you have indicator, parkinglight and brake light on the same output.
Ah? Ok, didn't know that, I will try it, maybe module plays with led intensity, it will save as least 2 outputs!

Have a nice evening
Philippe

Re: US and standard indicator lights

Verfasst: Mi 18. Feb 2015, 21:30
von Rascal
Phil13 hat geschrieben:Ah? Ok, didn't know that, I will try it, maybe module plays with led intensity, it will save as least 2 outputs!
You guess correctly, it uses different intensity. Note that the intensity levels for the "Combined American Tail-Lights left/right" don't sum up to 100% max, which is different to using the normal "Combined Tail-Lights".
So you can set values like e.g. 10% Parking Light, 100% Brake and 50% Indicator for the American lights.

Re: US and standard indicator lights

Verfasst: Mi 18. Feb 2015, 21:46
von Phil13
Hi Rascal,

Ok, thanks for that, just great! Impressive possibilities of this module...

Philippe