Seite 1 von 1

Left turn Options

Verfasst: Mo 18. Aug 2014, 20:40
von astecme
Hello all.

In the UK it is becoming a requirement that the vehicle warns when turning left. so when the left turn indicator is on you must also play "warning this vehicle is turning left" I have the necessary clip but cannot see how to attach it to the left turn indicator only - whilst in addition keeping the indicator sound.

HELP please!

Re: Left turn Options

Verfasst: Di 19. Aug 2014, 22:16
von marco polo
interesting feature

i will look into that
i think i have a good idea
yust a few questions
is the model equipeded whit foglights on the front
what happens in the real thing when the alarm lights are ativated
does it also works when in reverse

Re: Left turn Options

Verfasst: Mi 20. Aug 2014, 08:51
von astecme
Marco, Hi.

Yes the model has white fog lights - I see where you are going I think.

The model has had the reversing sound replaced with " -beep- 'attention this vehicle is reversing' - beep" as per many UK trucks. I loaded the sound to the sound centre.

There is a short video here https://www.youtube.com/watch?v=oppFJDSCL_Q

Re: Left turn Options

Verfasst: Mi 20. Aug 2014, 22:04
von marco polo
hi astecme

try the following
i used the digital mode
first is to switch the front fog lamps in a different way
instead of front fog light use static in the output screen
lets say on output 1
to activated the fog lamps use the "output 1" command instead of the command "front fog lamps"
it works the same but with a different name

then fill a sound slot with the "warning this vehicle is turning left" sound file
lets say slot 30

use prop channel #2 for the steering command ( you need an extra patch cable)
cable from reciver (steering) to usm prop channel 2
cable from usm prop channel #2 to steering servo

in the prop channel section
programm indicator left short in position (memory) position A indicator is activated when moving stick shortly in to position A activation point can be adjusted
programm indicator right short in position (memory) position D indicator is activated when moving stick shortly in to position D activation point can be adjusted


program output 2 with bending light left
mark the box "indicator off by steering on channel #2" it then turns of the indicators when the stick goes to neutral position
mark the box "bending licht via steering on prop channel #2" only when you want to use it autmatic when making a left turn
mark the box "bending light via indicators"

then make a connection ( thin wire ) form out put 2 to input x1/7

program input x1/7 whit aditional sound 30

warning it only works when the parking / drive light is active


save youre work to the hard drive
write everyting to the sd card

Re: Left turn Options

Verfasst: Mi 20. Aug 2014, 22:23
von marco polo
sorry i forgot someting to mention

in sound slot 30 activate the box "loop/complete"

Re: Left turn Options

Verfasst: Mo 22. Sep 2014, 10:34
von astecme
Thanks,

I will try it.