Seite 1 von 1

Cannot active the same sound twice.

Verfasst: Mi 19. Feb 2014, 17:48
von Sune Nielsen
Hi there..
I have just installed the USM-RC2 in
I use an MC-12 with the Mergen multi switch.
I have Jeti EX 2.4 ghz.
I made it all work :)

One small problem though.
If I activate a sound. I cannot activevate the same sound before I have activated another sound first.
Example. If I start the engine sound. I cannot stop the engine sound before I have used another sound...


Best regards...

Re: Cannot active the same sound twice.

Verfasst: Do 20. Feb 2014, 10:33
von BEIER-Electronic Andy
Hello Sune,

flashes the blue LED on the USM-RC-2 periodically? Also when you trigger a function with a switch?

Can you upload your project file (*.usm). And maybe a recorded diagnosis file (diagnose.dat) from this problem?

Re: Cannot active the same sound twice.

Verfasst: Do 20. Feb 2014, 20:40
von Sune Nielsen
It only flashes when I use one of the switches on the transmitter...
I will get back to you, with a setup file and the diagnosis

Re: Cannot active the same sound twice.

Verfasst: Fr 21. Feb 2014, 07:44
von BEIER-Electronic Andy
Please try to invert (reverse) the multiswitch channel in the mc-12 or with the Jeti-Box.

Re: Cannot active the same sound twice.

Verfasst: Sa 22. Feb 2014, 20:37
von Sune Nielsen
Thank you for clearing that up :)
The channel was reversed. Must have been mistake.

Everything works like a charm now.

Most awesome sound module.