Seite 1 von 1

detection times.

Verfasst: Di 10. Dez 2013, 10:37
von astecme
Would it be possible to reduce the detection times for stick positions in digital mode? i.e. using zones on the TX sticks for selecetion of actions. - or make it selectable?

If you have set your TX so that that the zones can be selected by use of e.g. rates and then the zone is just full stick, then the detection time for short period only needs to be e.g. under 1 second in the position. The long in position then only needs to be over 1 second.

I ask as sometimes it seems to take an extremely long time to register an action and that means that when you mean to select a "short" period that it is easy to over/under estimate the time and either do nothing or do the "long" in position action.

Actually if you do not use dual rates to register the position this is even more of a problem ( challenge!)

Thanks

Allan

Re: detection times.

Verfasst: Di 10. Dez 2013, 11:37
von BEIER-Electronic Andy
It's already planned for the next update :)

Re: detection times.

Verfasst: Di 10. Dez 2013, 15:09
von astecme
Thanks and then static in position would be longer than 2 seconds?

Re: detection times.

Verfasst: Di 10. Dez 2013, 22:13
von marco polo
i like the static in position as it is
i use this to control a horn sound (aditional sound 1 with a loop)
and a high beam flash
several short bursts works very fine with this setting
but also a long activation as long as it is activated
i think that if its active after 2 seconds
i can not achief the same function anny more

Re: detection times.

Verfasst: Mi 11. Dez 2013, 08:03
von BEIER-Electronic Andy
astecme hat geschrieben:Thanks and then static in position would be longer than 2 seconds?
No, the static function remains probably as it is. It is exactly designed for such things as marco polo describes

Re: detection times.

Verfasst: Sa 4. Jan 2014, 13:17
von astecme
I can see Marco's point of view.

If you use the static setting then after some time does it change to shortly in position and then long in position? does the static in position work as well as the long or short?

Re: detection times.

Verfasst: Mo 6. Jan 2014, 23:10
von marco polo
to all of you out there
happy new year form holland

i made a demo video

in this video i show serveral different functions
whit a robbe f14 trasmitor whit stick control only
also the static function
used for the high beam
and for the volume control

as long as you oparate the static function the output is that long active

see for your self
http://www.youtube.com/watch?v=C7Q-7JpZ ... 46NhAcCCcL

please feel free to make a comment to it

greetings from the netherlands