Output 11 - 12
Verfasst: Do 26. Sep 2013, 14:42
Dear beier team
i have a small problem
i have connected led´s to the output 11 and 12
two white led´s in serie whit one resistor at each output
i assinged the outputs to the highbeams
1 x highbeam to output 11 and 1 x highbeam to output 12
also i have assiged a outputsequence to output 11 and 12
to make a strobe flashlight of the high beams
when the outputs are in the off position
the led´s are yust a bit glowing
it looks like a leaking current on the outputs
output 1 -10 don´t look to have this problem
does this have to do something whit te servo outputs x8 1/2
can it be fixed a software update
or must it be fixed with some extra hardware (extra diode)
greeting from holland
i have a small problem
i have connected led´s to the output 11 and 12
two white led´s in serie whit one resistor at each output
i assinged the outputs to the highbeams
1 x highbeam to output 11 and 1 x highbeam to output 12
also i have assiged a outputsequence to output 11 and 12
to make a strobe flashlight of the high beams
when the outputs are in the off position
the led´s are yust a bit glowing
it looks like a leaking current on the outputs
output 1 -10 don´t look to have this problem
does this have to do something whit te servo outputs x8 1/2
can it be fixed a software update
or must it be fixed with some extra hardware (extra diode)
greeting from holland