Seite 1 von 1
alarm sound and blinkers in output sequence
Verfasst: Mi 10. Apr 2013, 13:31
von darentz27
is it possible in sound-teacher 1.11b to put the blinkers and chirp sound in a sequence like a real alarm on a truck?
Re: alarm sound and blinkers in output sequence
Verfasst: Mi 10. Apr 2013, 13:47
von BEIER-Electronic Andy
Yes. Just activate the blinker outputs in the sequence and configure the sequence you want. Then activate the output sequence at the chirp sound.
Re: alarm sound and blinkers in output sequence
Verfasst: Do 11. Apr 2013, 12:28
von darentz27
Can someone help me to configure soundteacher?my blinkers are connected to output 2&4.
Re: alarm sound and blinkers in output sequence
Verfasst: Do 11. Apr 2013, 13:06
von BEIER-Electronic Andy
Of course...

- beispiel_ausgangssequenz_chirp.gif (42.72 KiB) 5036 mal betrachtet
Re: alarm sound and blinkers in output sequence
Verfasst: Do 11. Apr 2013, 13:27
von darentz27
and by the proportional channel i select output sequence 1?
Re: alarm sound and blinkers in output sequence
Verfasst: Do 11. Apr 2013, 13:41
von BEIER-Electronic Andy
No, select the additional sound (chirp.wav). Additional sound 3 in the example.
The sound activates then the output sequence.