Seite 1 von 1

Make 2 leds flash randomly (strobe effect)

Verfasst: So 17. Mär 2013, 16:59
von Dio
just wondered if it was possible to make that effect. Im jusing the module on a Tamiya Scania and would like to create that on some of the leds ex. indicator leds

Regards

Jan Tore
Norway

Re: Make 2 leds flash randomly (strobe effect)

Verfasst: Mo 18. Mär 2013, 08:37
von BEIER-Electronic Andy
Hello Jan,

can you explain more details about this strobe effect or can you show us a youtube video?

Re: Make 2 leds flash randomly (strobe effect)

Verfasst: Mo 18. Mär 2013, 09:01
von Leonard
You can not make it random, but You can use Sequense to make a simulation of it.

Re: Make 2 leds flash randomly (strobe effect)

Verfasst: Mi 20. Mär 2013, 19:33
von Dio
Was thinking about something like this, but not every effect like this guy are doing in 1 sequence. Would have been cool to do on my indicator lights or others. http://www.youtube.com/watch?v=dG9pFW8on-Q

BEIER-Electronic hat geschrieben:Hello Jan,

can you explain more details about this strobe effect or can you show us a youtube video?

Re: Make 2 leds flash randomly (strobe effect)

Verfasst: Mi 20. Mär 2013, 19:37
von Schleppervolker
cool :twisted:

Re: Make 2 leds flash randomly (strobe effect)

Verfasst: Do 21. Mär 2013, 08:06
von BEIER-Electronic Andy
Ok, that are complex sequences... It's not possible to make all these things with the 2 available output sequences.

Tell me what part of the video you want, and we try to make an output sequence for the USM-RC-2.

But another problem:
At the moment it is not possible to activate an output like the indicators from an output sequence. The outputs in the sequence must be separate outputs. So you need 2 more outputs for such an effect. But then you can connect the 2 sequence outputs directly to the outputs for the indicators (or other outputs).

Re: Make 2 leds flash randomly (strobe effect)

Verfasst: Do 21. Mär 2013, 16:50
von Dio
Thank you for your respons. If you look at the strobe effect at 0.47 in the video, thats the one i could use for some of my lights. I have output 11 and 12 free at the moment.
BEIER-Electronic hat geschrieben:Ok, that are complex sequences... It's not possible to make all these things with the 2 available output sequences.

Tell me what part of the video you want, and we try to make an output sequence for the USM-RC-2.

But another problem:
At the moment it is not possible to activate an output like the indicators from an output sequence. The outputs in the sequence must be separate outputs. So you need 2 more outputs for such an effect. But then you can connect the 2 sequence outputs directly to the outputs for the indicators (or other outputs).

Re: Make 2 leds flash randomly (strobe effect)

Verfasst: Fr 22. Mär 2013, 11:11
von BEIER-Electronic Andy
Here the sequence for this part in the video:
beispiel_ausgangssequenz_4-fach_doppelblitzer.gif
beispiel_ausgangssequenz_4-fach_doppelblitzer.gif (9.89 KiB) 6855 mal betrachtet
You need the Sound-Teacher V1.11a for this short flashes.

Re: Make 2 leds flash randomly (strobe effect)

Verfasst: Sa 23. Mär 2013, 14:39
von Dio
Thanks alot Beier Team. This is much appreciated by me. Good to know that i bought the right product for excellent customer service.

Jan-Tore
Norway
BEIER-Electronic hat geschrieben:Here the sequence for this part in the video:
beispiel_ausgangssequenz_4-fach_doppelblitzer.gif
You need the Sound-Teacher V1.11a for this short flashes.

Re: Make 2 leds flash randomly (strobe effect)

Verfasst: Mo 25. Mär 2013, 16:35
von Dio
And here you can see how it turned out. Think it looks really great.

http://www.youtube.com/watch?v=HbW6_2_NKlM