Seite 1 von 1

Neuer Ausgangstyp

Verfasst: Di 1. Jan 2013, 09:10
von gismow
Moin, moin...

Wie wäre es mit einem weiteren Ausgangstyp "Tagfahrlicht" ?

Greetinx
gismow

Re: Neuer Ausgangstyp

Verfasst: Di 8. Jan 2013, 15:00
von BEIER-Electronic Andy
Gute Idee. Wird wahrscheinlich beim nächsten Update kommen.

Re: Neuer Ausgangstyp

Verfasst: Di 8. Jan 2013, 16:59
von Leonard
I have another wish: Kurvenlicht.

Now You have put in the option with channel 2 to switch off the blinker, it most be possible to switch an output on then turning.
It shall fade on then turning or switching on the blinker. Then the blinker switch off it shall fade off.
Of course with a right and a left output.

It shall not work then Tagfahrlicht are on, it shall only work then Abblendlicht are on (I don't think it works with Fernlicht).

Only problem will be that we will be short of outputs with all these options :roll:

Re: Neuer Ausgangstyp

Verfasst: Do 10. Jan 2013, 08:17
von BEIER-Electronic Andy
Ok, ich habe das mit dem Kurvenlicht mal notiert... Werden wird beim nächsten Update dann mal prüfen, ob wir das noch einbauen können.