Seite 1 von 1

multi switch robbe 1511

Verfasst: So 2. Dez 2012, 23:57
von marco polo
hi beier team

i was wondering if the multi switch 1511 from robbe needs to be programed manualy
i experienced that when i switch on the main power
there where 3 sounds played
the sounds that are programend on
switch 5 down
switch 6 down
switch 7 down

in another post i also mentioned that switch 8 down has no funtion when used as multiswich 2
so i cannot say if the sound also plays at powerup
i only tried it as a second multi switch

nr 1 plays switch 1 up
nr 2 plays switch 1 down ( i acspected switch 2 up )
nr 3 plays switch 3 up
nr 4 plays swicht 4 up
nr 5 plays switch 5 up or switch 5 down there is no middel it is a flipswitch
nr 6 plays switch 6 up or switch 6 down there is no middel it is a flipswitch
nr 7 plays switch 7 up or switch 7 down there is no middel it is a flipswitch
nr 8 is a moment switch it toggels back in the down position
1511 robbe
1511 robbe
F1511.jpg (48.79 KiB) 2930 mal betrachtet
greets from holland

marco polo

Re: multi switch robbe 1511

Verfasst: Mo 3. Dez 2012, 13:21
von BEIER-Electronic Andy
We don't have a 1511 here... But if the switches 5-8 have no middle positions, it's "normal" that the assigned sounds play at power on.

Re: multi switch robbe 1511

Verfasst: Mo 3. Dez 2012, 23:15
von marco polo
thanks beier team

for the quick response
ok then if i am going to use it i will leave the slots empty
or assign them different

gr marco polo