Seite 1 von 2
USM-RC2/3 and SFR support for Graupner DS with radio FlySky Paladin EV18
Verfasst: Mo 14. Sep 2026, 17:53
von MdG-77
This radio ‘FlySky Paladin EV18’ supports the Graupner Digital Switches, only they are not supporting the Graupner SumD3 protocol!
Here the DS description between 2/3-positions:

- 2/3-position description
- IMG_9058.jpeg (2.84 MiB) 815 mal betrachtet
Here the Protocol choice when the 2-position is selected (Sbus only!)

- Port protocols 2-position
- IMG_9059.jpeg (2.76 MiB) 823 mal betrachtet
After selecting the 3-position (Bind settings) (PPM2-DS only, for Nautic Graupner):

- Port protocols 3-position
- IMG_9067.jpeg (3.13 MiB) 823 mal betrachtet
Is there any chance to support one of these options?
I see many people using these radio’s but they can’t use these nice (Touchscreen) DS option.
If there is more info needed, please let me know!
Re: USM-RC2/3 and SFR support for Graupner DS with radio FlySky 18EV
Verfasst: Mo 14. Sep 2026, 18:03
von MdG-77
Here the 2-position DS Touchscreen view (can be scrolled up/Down to get all DS Buttons):

- DS Touchscreen view
- IMG_9069.jpeg (3.37 MiB) 820 mal betrachtet
Re: USM-RC2/3 and SFR support for Graupner DS with radio FlySky Paladin EV18
Verfasst: Mo 14. Sep 2026, 20:21
von MdG-77
Here some info, when it’s in 2-position mode:

- IMG_9070.jpeg (3.86 MiB) 811 mal betrachtet
So they are using channels 15 and 16 to transmit all the info for all 22 DS.
Re: USM-RC2/3 and SFR support for Graupner DS with radio FlySky Paladin EV18
Verfasst: Di 15. Sep 2026, 07:38
von BEIER-Electronic Andy
Unfortunately, we do not have any detailed information on this, nor do we have a FlySky Paladin EV18 available for testing.
However, as I understand it, the 3-position switch likely uses the "standard" Graupner Nautic protocol—which our modules already support.
But I have absolutely no idea how the transmission of the 22 two-position switches on channels 15 and 16 is supposed to work.
Re: USM-RC2/3 and SFR support for Graupner DS with radio FlySky Paladin EV18
Verfasst: Di 15. Sep 2026, 15:36
von MdG-77
Yes I totally understand it’s hard to see what the options are, without the hardware
If you think it’s interesting, please let me know so I can and will send my Paladin EV18 to you, including the receiver.
What about the Graupner Nautic option, the thing is that it’s a full PPM train, instead of a single PWM.
(I have a old school PPM to PWM decoder (CD4017 ic) and will give it a try)
And for the Sbus-DS option (2-position mode) they use channels 15 and 16.
Maybe I will try to make a scope from both, to understand better how they have include these DS.
Re: USM-RC2/3 and SFR support for Graupner DS with radio FlySky Paladin EV18
Verfasst: Mi 16. Sep 2026, 07:49
von BEIER-Electronic Andy
If they call it "Nautic Graupner" and it requires eight 3-position switches, then it almost certainly emulates an original Nautic switch module—meaning it should work with our modules as well.
As for the version with twenty-two 2-position switches, you could record a diagnostic log while pressing the switches one by one. That should reveal the principle behind the transmission.
Re: USM-RC2/3 and SFR support for Graupner DS with radio FlySky Paladin EV18
Verfasst: Do 17. Sep 2026, 01:25
von MdG-77
Thanks for the reply, good point to use the ‘diagnostic’ option.
I will give it a try with the 2-position mode (in my case the best option to use) when I get some spare ‘hobby’ time
When it works, I will create a record form single Switches separate and then a new record with more Switches at the same time and at the end all switches On and will share the file.
For the PPM 3-position mode, I hope they are not using the highest channel(s), my PPM converter handles 10 channels max.
If I’m right, Graupner was using max 12 channels with most 40Mhz radio’s like the MC-19 or higher.
Re: USM-RC2/3 and SFR support for Graupner DS with radio FlySky Paladin EV18
Verfasst: Fr 18. Sep 2026, 02:52
von MdG-77
Just checked the PPM output and connect it with my 4017 PPM converter, the standard PPM works fine (8 channels in one Positive Puls Train modulation), the PPM2-DS (Nautic Graupner) gives no output with my converter
So I connected my oscilloscope to this PPM2-DS output and ‘HMM

’ it’s a single puls and repeats each 20ms so that’s a good sign
(Makes also sense why my PPM converter was not working
This opens the door, to check later this week the Nautic input and play a bit with some settings.
To be continued

Re: USM-RC2/3 and SFR support for Graupner DS with radio FlySky Paladin EV18
Verfasst: Sa 19. Sep 2026, 01:23
von MdG-77
Just test it and there is some life in it!
I connected the receiver with the default Sbus, for all basic Prop-channels and un-patched Prop-3 from Sbus and connected the PPM-DS GR/Futaba output direct to Prop-#3 input.
With the Graupner Nautic 3-position mode all Buttons are reversed!
FlySky DS 1 (Up) = ‘Beier Nautic GR’ Switch 8 down
FlySky DS 8 (Down) = ‘Beier Nautic GR’ Switch 1 Up
In the PPM1-DS Nautic Futaba mode, it’s more close together, only the Up/Down’s are swapped!
FlySky DS 1 (Up) = ‘Beier MultiSwitch Robbe’ Switch 1 Down
FlySky DS 1 (Down) = ‘Beier MultiSwitch Robbe’ Switch 1 Up
Etc….
With the Sbus-DS as output, it looks like they use Sbus-channel 15 for only DS Button 1 to 11 and Sbus-channel 16 for only DS Buttons 12 to 22.
Looks like that they use it with a 11bit range with these steps > 0, 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 (Only DS Button 11 On = 1500us)
With all DS Buttons off, it all starts with a low value <900us and with all 11 DS Buttons on it’s above 2097us !
(I’m using the last firmware with my USM-RC3 V1.20b)
Re: USM-RC2/3 and SFR support for Graupner DS with radio FlySky Paladin EV18
Verfasst: Mo 21. Sep 2026, 15:06
von BEIER-Electronic Andy
Thanks for the tests! Very interesting results.
The fact that the switches on the Nautic are swapped must be a mistake on FlySky's part; we adopted the decoding logic from the original Graupner and Robbe protocols.
However, the concept of the 2 x 11 digital switches is a really good idea from FlySky. Do you know if there are any other radios that offer this feature?