Seite 1 von 1

Movement Seems Delayed with Engine Sounds

Verfasst: Mi 25. Feb 2026, 20:24
von MattMPA
Good day!

I'm just completing a truck project and having an issue, I seemingly cannot correct.

I am using the engine sounds from the Ford F-350 folder.

First concern is that just off idle it seems to go to a very high RPM sound. Almost like a switch, on and off. Not a gradual rise.

The other concern is that the engine RPM sounds come up a good bit before the truck actually starts to move.

I I seem to remember an adjustment for the latter concern, but cannot find it in the software or the manual.

Thankful for any thoughts! I've attached the file.

Re: Movement Seems Delayed with Engine Sounds

Verfasst: Mi 25. Feb 2026, 21:49
von Rascal
Hello Matt,
MattMPA hat geschrieben: ↑Mi 25. Feb 2026, 20:24First concern is that just off idle it seems to go to a very high RPM sound. Almost like a switch, on and off. Not a gradual rise.
That's caused by the sound file for the "Vehicle start sound". Only option I see is to replace the file with one taken from another folder.
The other concern is that the engine RPM sounds come up a good bit before the truck actually starts to move.

I I seem to remember an adjustment for the latter concern, but cannot find it in the software or the manual.
Please refer to the manual on page 65 under 'Zero point deadband threshold:'.

Re: Movement Seems Delayed with Engine Sounds

Verfasst: Do 26. Feb 2026, 02:02
von MattMPA
Thanks Rascal! Got it working nicely!