Seite 1 von 1

Motor-Sound mit oder ohne Rauch

Verfasst: So 10. Aug 2025, 10:10
von minimivic
I would like to be able to have Engine start on a switch and engine sounds work.
I also want the ability to turn on the smoker heater with relay as an option so I can have engine sound with smoke or no smoke.
On a 2 way switch I have function sequence 4 to turn sound and relay on and FS 5 to turn them off. but I don't have just sound available without using a second switch.
Can I use a 3 way switch for this? My ideal Switch up - engine sound only, Switch down - engine and smoke (function sequence4) Switch middle - turn off sound and turn off smoke (function sequence 5) I cant see if thats possible.

Thanks

Re: Motor-Sound mit oder ohne Rauch

Verfasst: So 10. Aug 2025, 12:11
von Rascal
Hello minimivic,

a 3-way switch (ON-OFF-ON) would work. You don't need any Function sequence, just configure one Multi function instead:

Multi function 1
- "Engine sound on/off"
- "Smoke generator on"

Smoke1.png
Smoke1.png (83.77 KiB) 730 mal betrachtet

Switch up (ON): Function "Engine sound on/off"
Switch middle (OFF): -
Switch down (ON): Function "Multi-Function 1"

Prop #8 is just an example, you can of course use any other available prop channel:

Smoke2.png
Smoke2.png (97.1 KiB) 730 mal betrachtet
Switch middle - turn off sound and turn off smoke (function sequence 5)
Note: You cannot assign any function to the N position (OFF) of the switch. This is not necessary anyway as the function will be switched off automatically when the switch is returned to the middle position.

If the switch is momentary assign the functions to a column with memory (short or long in position). Push once to turn the function on, push again to turn off.

Re: Engine sound with or without smoke

Verfasst: So 10. Aug 2025, 15:58
von minimivic
Rascal

Many thanks for this it works a treat. I seem to miss the simple solutions.