Seite 1 von 1

Output 1-16 how many amps?

Verfasst: Mo 24. Feb 2025, 20:40
von minimivic
Question about the power output available on outputs 1-16.

Input voltage 12v
I know out 17 can have 3a

I want to connect 4 x PC 60mm fans to the proportional output so they change speed when engine revs rise is it OK to use outputs 1-16? or I could use 17 if not used in below question.

Also can a standard 12v 40A relay be triggered by output 1-16 or should I do it differently, ie RC switch to trigger 12v relay? I need to switch a smoker heater element not proportional.

Thanks

Re: Output 1-16 how many amps?

Verfasst: Mo 24. Feb 2025, 21:57
von Rascal
Hello,
minimivic hat geschrieben: ↑Mo 24. Feb 2025, 20:40I want to connect 4 x PC 60mm fans to the proportional output so they change speed when engine revs rise is it OK to use outputs 1-16?
Each output can handle 1.5A but the sum of outputs 1 to 16 is limited to 3.0A, see also page 6 of the manual.
or I could use 17 if not used in below question.
I don't understand what you mean by "if not used in below question".
Also can a standard 12v 40A relay be triggered by output 1-16 or should I do it differently, ie RC switch to trigger 12v relay? I need to switch a smoker heater element not proportional.
Yes, you can trigger a relay using any of the outputs. Configure the output as "Static (on or off)" and set the intensity to 100%.

For inductive loads like motors (including fans) and relays make sure to add a flyback diode, else the output(s) will get damaged!