Seite 1 von 1

Juwuba Model Scania 770s Light System

Verfasst: Mo 9. Dez 2024, 12:34
von chsw740118@gmail.com
Hello
Juwuba model I want to use the Scania 770s light system on the sfr-1. As shown in the picture,if you connect the receiver power (1 channel) to the Y jack and connect the power to the light system module,the lights will all turn on. Is there a way to control it?

Re: Juwuba Model Scania 770s Light System

Verfasst: Mo 9. Dez 2024, 14:17
von Rascal
Hello,

is that box / module on the right meant for the M24?

If yes there should be a cable assembly with a white connector and 7 open-end wires (6 black, 1 red).
Those wires connect to the outputs of the SFR-1, red goes to Plus.

Re: Juwuba Model Scania 770s Light System

Verfasst: Mo 9. Dez 2024, 15:48
von chsw740118@gmail.com
This is the Servonaut m24 version. Of course, there is a cable assembly, and is it possible to control the on/off with all the lights on like now?

Re: Juwuba Model Scania 770s Light System

Verfasst: Mo 9. Dez 2024, 22:11
von Rascal
I do not know why all the lights are on. I can only suggest you try it out.

Re: Juwuba Model Scania 770s Light System

Verfasst: So 9. Feb 2025, 01:11
von wampablo
im currently using these lights on my truck. im not using the m24 box im just hard wiring them using a voltage dropper and connecting the rest of the wires as i would just using leds and resisters.