Seite 1 von 1
Brushless ESC and motor on LM_BT Servo sonnection
Verfasst: So 4. Feb 2024, 17:48
von RayC
Hi
I want to use a LM-BT-16-4 on a trailer which has a Brushless ESC and motor driving an hydraulic pump. Can a brushless ESC be connected to a servo connection on a Bluetooth Light Module (and would it work

)? I am trying to be sure it will work before I order all the parts?
Thanks
Ray
Re: Brushless ESC and motor on LM_BT Servo sonnection
Verfasst: So 4. Feb 2024, 18:36
von Rascal
Hello Ray,
yes that will work. Anything that can connect to a receiver can also be connected to the servo output as long as the current draw does not exceed 1A permanently. An ESC does not require that much of current typically (for the control circuit) and there is no difference to the light module if the ESC drives a brushed or brushless motor.
However note that a BEC in the ESC must be disabled by pulling the red wire from the servo plug and insulating it.
If the ESC does not have a BEC then the red wire must stay in the plug.
Re: Brushless ESC and motor on LM_BT Servo sonnection
Verfasst: Mo 5. Feb 2024, 15:43
von RayC
Thanks Rascal
I was hoping it wouldn't work so that I could have a technical excuse not to buy the trailer. (I hope my double negatives are not lost in translation.
I guess I'll have to get them now
Ray