Seite 1 von 1

adjustmend sound volume

Verfasst: So 26. Feb 2012, 23:56
von marco polo
hi beier team

when i use my engine start cold or warm i can not change the sound volume
for the lenght of the soundfile
if i adjust it during the playing of the start soundfile
the the sound is then changed when the start soundfile is finnised playing
there is also a little hickup in the sound about 3 seconds after every volume adjustmend
i used sound adjustmend on the stick function (ekmfa) in positon static on prop channel 2
volume + on position a
volume - on position d
i hope you can do something with this information

gr marco polo

Re: adjustmend sound volume

Verfasst: Di 28. Feb 2012, 08:07
von BEIER-Electronic Andy
The volume adjustment during the startsound is fixed with the Sound-Teacher V1.00i.

The little hickup after a few seconds... In this moment, the module is saving the new volume setting onto the SD card. This takes a few ms and while this time the modul can't read new sounds from the card...

Your ears are too good for this module :mrgreen:

Re: adjustmend sound volume

Verfasst: So 4. Mär 2012, 23:20
von marco polo
thanks for the explane of the hickup ;)

and yes the adjustmed is fixed with version v1.00i :D

thanks again


marco polo