Seite 1 von 2
Fahrsound Länge speichert sich im Soundteacher nicht!
Verfasst: Mi 15. Feb 2012, 11:56
von Kawareiter
Hallo liebes Beier Team,
Möchte mich erst einmal für dieses Top-Produkt bedanken. Habe aber dennoch ein kleines Problem mit dem Sound-Teacher.
Wenn ich bei dem Fahrsound zb. 2 Gänge einstelle und die länge des FG1 verschiebe sodas FG1 länger ist als FG2 bleibt diese Einstellung nach dem Speichern, schließen und neu öffnen des Sound-Teachers nicht gespeichert. Es wird wieder genauso geöffnet wie in der Originaleinstellung = FG1 und FG2 sind gleich lang!
Ist das ein bekanntes Problem oder hat das auch ein anderer Benutzer dieses Moduls?
Vielen Dank schonmal
MFG
Christian
Re: Fahrsound Länge speichert sich im Soundteacher nicht!
Verfasst: Mi 15. Feb 2012, 13:07
von BEIER-Electronic Andy
Hallo Christian,
danke für den Hinweis. Hier gab es tatsächlich noch ein Bug.
Ein Update liegt zum Download bereit (Menü Datei -> Updates auf den Internet laden).
Re: Fahrsound Länge speichert sich im Soundteacher nicht!
Verfasst: Mi 15. Feb 2012, 13:12
von Kawareiter
Hallo, das nenne ich mal ein Service, kaum gemeldet, schon repariert!!
Danke Christian
Re: Fahrsound Länge speichert sich im Soundteacher nicht!
Verfasst: Mi 15. Feb 2012, 14:29
von airknee
Na das ist mir ja gar nicht aufgefallen
Wahrscheinlich weil die Längen kaum unterschiedlich lang waren.
Aber das Kuriose ist: Ich habe eine Veränderung der Länge vorgenommen gehabt.
Also 1.Gang sehr lang. 2.Gang kurz.
Gespeichert mit V1.00c ------- Dann aufgemacht: Beide gleiche Länge.........
Eben diese Datei mit V1.00f geöffnet, siehe da der Unterschied war sofort zu sehen. Also die Veränderung wurde in der Version 1.00c gespeichert. Und auch korrekt.
Aber eben angezeigt war das anders.
Na das war ja mal komisch

Gruß Airknee

Re: Fahrsound Länge speichert sich im Soundteacher nicht!
Verfasst: Mi 15. Feb 2012, 14:49
von BEIER-Electronic Andy
Gespeichert wurde es immer korrekt - aber beim Einlesen der *.usm-Datei wurden die Schaltpunkte falsch gesetzt.
Re: Fahrsound Länge speichert sich im Soundteacher nicht!
Verfasst: Do 16. Feb 2012, 00:47
von marco polo
hello beier team
i'have updated to the version f
and saw that the diagnose version was changed from version 1.00a into 1.00b
the shifting points now are saved correct but when i changed them
there is still a problem when you slowdown
the sound is hanging in a loop
it than does not shift up or down anymore and does not go back to stationair
the only thing that helps is to restart the engine
even when you set the hysteris to the max of 10
i have tried it im digital and mix mode
whit 1,2,3,4 and 5 gears
sometimes when you set the shifting lines to close together and tried to upload them
whit the cable it gives a runtime error and shuts down the soundteacher
greetings from holland
marco polo
Re: Fahrsound Länge speichert sich im Soundteacher nicht!
Verfasst: Do 16. Feb 2012, 07:30
von BEIER-Electronic Andy
And also here, please send us your project file (and in this case also all wav files), which shows this problem.
Re: Fahrsound Länge speichert sich im Soundteacher nicht!
Verfasst: Fr 17. Feb 2012, 00:11
von marco polo
done

Re: Fahrsound Länge speichert sich im Soundteacher nicht!
Verfasst: Sa 18. Feb 2012, 00:03
von marco polo
i have updated to version v1.00g
it seems good for the forward gears
but with the backward gears it does not go back to the staitionair sound file ( sound file 3 )
it hangs in sound file 33
if you then pusch the trotle forward and let go
it the falls back to stationair
i treid to increase the zero point deadband and the hysteris
but it gives no effect
could you take a look for that as well
i thank you for the support so far
it's realy great
greetings
Re: Fahrsound Länge speichert sich im Soundteacher nicht!
Verfasst: Mi 22. Feb 2012, 00:01
von marco polo
fixed with version h
thanks
marco polo