Seite 1 von 1

Beier SFR-1-D with Asiatam/Taigen recoil unit

Verfasst: So 29. Mai 2022, 10:51
von thuat.bui
Hello,

I'm new here. Anybody successfully connect & configure the Asiatam/Taigen recoil unit with SFR-1-D? Can you please help? I can connect the elevation motor. It's simple. The recoil motor is quite challenge. Any helps would be appricated.

Re: Beier SFR-1-D with Asiatam/Taigen recoil unit

Verfasst: Mo 30. Mai 2022, 15:00
von BEIER-Electronic Andy
Hello thuat.bui

can you post a link to the recoil unit?

Re: Beier SFR-1-D with Asiatam/Taigen recoil unit

Verfasst: Do 2. Jun 2022, 02:35
von thuat.bui

Re: Beier SFR-1-D with Asiatam/Taigen recoil unit

Verfasst: Do 2. Jun 2022, 08:00
von BEIER-Electronic Andy
Sorry, but I have no informations about that unit.

How many pins has the connector with the black, red and green wires? I can't see that in the picture. I would guess there are 3. But that doesn't make any sense to me, since I don't know a 3-pin conector at Taigen.

Re: Beier SFR-1-D with Asiatam/Taigen recoil unit

Verfasst: Sa 4. Jun 2022, 06:08
von thuat.bui
It has 03 pins. Similar to Tamiya recoil unit

Re: Beier SFR-1-D with Asiatam/Taigen recoil unit

Verfasst: Di 7. Jun 2022, 14:59
von BEIER-Electronic Andy
The Tamiya recoil unit has other colors:
• green: Battery +
• blue: Battery -
• white: Trigger pulse (0,5 s)

I think this will work similarly with the Asiatam/Taigen recoil unit.

However, there is still a problem with the Tamiya recoil unit if the battery voltage is too high. Here the voltage must be reduced, otherwise the recoil unit will no longer stop. Look here:
https://www.beier-electronic.de/modellb ... =31&t=3087

Re: Beier SFR-1-D with Asiatam/Taigen recoil unit

Verfasst: So 24. Jul 2022, 17:35
von thuat.bui
BEIER-Electronic Andy hat geschrieben: ↑Di 7. Jun 2022, 14:59 The Tamiya recoil unit has other colors:
• green: Battery +
• blue: Battery -
• white: Trigger pulse (0,5 s)

I think this will work similarly with the Asiatam/Taigen recoil unit.

However, there is still a problem with the Tamiya recoil unit if the battery voltage is too high. Here the voltage must be reduced, otherwise the recoil unit will no longer stop. Look here:
https://www.beier-electronic.de/modellb ... =31&t=3087
Thanks, I will test with my tank