Seite 1 von 1

multi switch for tx...

Verfasst: So 8. Jan 2012, 22:06
von Sune Nielsen
Will you be making a multiswitch module for transmitters?
In my case the Graupner Mc19....
As an alternative to the Graupner nautic module...

Regards....

Re: multi switch for tx...

Verfasst: Mo 9. Jan 2012, 09:18
von airknee
Hello Sune,

there is a shop where you can buy a 16k multiswitch encoder for graupner systems.

I've already use this one a few years......

And also you can buy a decoder for your receiver, this function is implementet in the usm-rc and in the new product usm-rc2.....

So now you have yourself to decide what you want to get......

Please email me to get the link to the shop. By the way i used it also in my graupner mc 19.........

And it works greatly.......

Regards Aikrnee

Re: multi switch for tx...

Verfasst: Mo 9. Jan 2012, 09:19
von airknee
I've forgott to say, this in an alternative to the original graupner system :)

Re: multi switch for tx...

Verfasst: Mi 11. Jan 2012, 10:49
von BEIER-Electronic Andy
Hello Sune,

the development of such a module would be not difficult. The problem is more the support for this.

There are so many manufacturers of transmitters and each manufacturer has several of types of transmitters. The connection in each transmitter is almost always different ... Each manufacturer has mostely different dimensions of the transmitter.

And some 2.4 GHz transmitters does not work with these multi-switch technology.

For these reasons, we don't want to develop an own multi-switch module at the moment. But maybe sometime in the future ..

Re: multi switch for tx...

Verfasst: Sa 14. Jan 2012, 21:25
von Sune Nielsen
Hello Beier...

Thanks for you reply... You have a good point... :)