Seite 1 von 1

soundtest v1.30e gear shift / turbo blow

Verfasst: Mo 4. Apr 2011, 01:20
von marco polo
this is my first video to be uploaded :mrgreen:

http://www.youtube.com/watch?v=qHAOpWJn ... laynext=41

took 5 gears and made the gearshift from a sound file form a cd
worked it out with goldwave
extra sounds were found on youtube and others :idea:
needs some fine tuning :oops:
but I'm happy so far :D
all comments are welkom

Re: soundtest v1.30e gear shift / turbo blow

Verfasst: Mo 4. Apr 2011, 09:45
von BEIER-Electronic Andy
Very nice :D

Re: soundtest v1.30e gear shift / turbo blow

Verfasst: Mo 7. Mai 2012, 21:27
von marco polo
hi every one

802° send me a pm in wich he asked how i made the shift sounds
so here some answers about it
the sounds are made from a cd
first i made a wave file from the track with goldwave
second i cut all the parts i did not needed from the file
then did some triming on the start en end to the file
the did some volume and a litle eq boost
i used 5 gears in the set up of the usm
i filed the vehicle start sound slot with the sound file
and all the 4 shift sound slot whit the same file
then i adjusted the moments when the shift files are played bij configuration engine sound
these are the red lines that you can move to the left or right
just play with them because every truck needs different settings

the start sound and the shift sound are uploaded in the soundcenter under
Home / Fahrsounds für das Soundmodul USM-RC / Scania V8 R143
and some aditional sounds under
Home / Zusatzsounds - Autos und Trucks

i hope i made it all clear to you all

greetings from the netherlands

ps a little gift
watch and be amazed
http://www.youtube.com/watch?v=vG7r9bDnCMQ
:o :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o