Seite 1 von 2

hydraulic sound ??

Verfasst: So 27. Mär 2016, 20:51
von kamyoncu-itulu1
Hallo, I have usm rc-2 All functions okay but, I want to get sound when I lift dumper body. ( same like servonaut)

When I open second motor sound, it does not be realistic. Do you have any other idea ?

Re: hydraulic sound ??

Verfasst: So 27. Mär 2016, 21:05
von Oldchap
I use a hydraulic sound in "Zusatzsounds", triggered by a Beier electronic switch. If one of my "hydraulic action channels" is a little out of neutral point, the sound starts.

Re: hydraulic sound ??

Verfasst: Mo 28. Mär 2016, 21:14
von kamyoncu-itulu1
thank you for help, unfortunately it works a couple second than stop, what should I do for continios sound ??

Re: hydraulic sound ??

Verfasst: Di 29. Mär 2016, 08:01
von BEIER-Electronic Andy
Which sound slots do you use? Please upload your project file (*.usm).

Re: hydraulic sound ??

Verfasst: Di 29. Mär 2016, 21:57
von kamyoncu-itulu1
Hello, I just uploaded. I used 2. chanel for hydrolic

Re: hydraulic sound ??

Verfasst: Mi 30. Mär 2016, 12:48
von BEIER-Electronic Andy
Ok, this is easy. Just change the playback mode of the additional sound 17 from "once / complete" to "loop / immed. stop".
beispiel_abspielmodus.png
beispiel_abspielmodus.png (26.13 KiB) 6228 mal betrachtet

Re: hydraulic sound ??

Verfasst: Mi 30. Mär 2016, 19:38
von kamyoncu-itulu1
thank you so much for solution, I am going to add a nice video of my truck with beier system. I am really happy with it.

Re: hydraulic sound ??

Verfasst: Mi 6. Apr 2016, 20:22
von astecme
If you use a servo for working the hydraulic from the USM then you can use that to trigger the sound. On the additional sound page scroll down until you find "sound from servo 1 left" etc, you can then use two different sounds on the servo, one for under load and one when not. I use these for my wrecker opening and closing the wing doors and raising/lowering the hidden axle.

Re: hydraulic sound ??

Verfasst: Do 7. Apr 2016, 21:04
von kamyoncu-itulu1
thank you for a new idea,

https://www.youtube.com/watch?v=ek_NAqf-0cg

I am done with my truck. Here is the video hopefully you guys like it

Re: hydraulic sound ??

Verfasst: Fr 8. Apr 2016, 09:22
von Ralph Cornell
I have seen your video. This truck is a very fine piece of craftwork. :D