Seite 1 von 1

Software V 1.3D

Verfasst: Fr 26. Jun 2015, 16:40
von astecme
Hi there,

I think I have found a problem!

I have an input set up as a Multifunction. F1 is set to indicator left. F2 is set to play additional sound 14 (This vehicle is turning left voiced once). I have set the additional sound both to loop immediate stop and to loop complete, with either setting the sound loops continuosly until the multifunction is selected once more. It needs to stop once the indicators stop. Is there a way round this?

Thanks

Allan

Re: Software V 1.3D

Verfasst: Fr 26. Jun 2015, 20:53
von Rascal
How do you trigger the multifunction - EKMFA, Nautic or prop channel?

How does the indicator stop - by time or via the steering channel?

Re: Software V 1.3D

Verfasst: Fr 26. Jun 2015, 21:10
von astecme
trigger is by proportional channel. Indicator is on for a time period.

Re: Software V 1.3D

Verfasst: Fr 26. Jun 2015, 21:59
von Rascal
I guess the prop channel is set to memory for the timer to work but it would also keep on playing the additional sound if it's configured as a loop. So technically the USM behaves correctly.

I don't think this can be solved easily as it would mean each selected function (F1, F2, F3) would need to be checked against each other for dependencies, which would be very complicated and there may still be users who would want it to function differently.

But there are two things you could try:

1. Edit the soundfile to repeat the voice for the same duration as the indicator is on and then use the "once/complete" or "once/immed. stop" option for the additional sound.
2. Put the sound as "indicator noise" under the "engine sound" tab. Not sure if this works but if it does you won't even need the multifunction for this.

Re: Software V 1.3D

Verfasst: Sa 27. Jun 2015, 13:54
von astecme
Thanks and yes that was ny conclusion as well.

I have recorded a version that is longer and will use that with once imm stop.

Unfortunately as this is for left turn only you cannot use the indicator sound - unless you had different options for left and right ;)

This is something that is coming in in the UK and trucks must now have it if they run in London.

Re: Software V 1.3D

Verfasst: Sa 27. Jun 2015, 17:34
von Rascal
astecme hat geschrieben:Thanks and yes that was ny conclusion as well.

I have recorded a version that is longer and will use that with once imm stop.

Unfortunately as this is for left turn only you cannot use the indicator sound - unless you had different options for left and right ;)

This is something that is coming in in the UK and trucks must now have it if they run in London.
Interesting.

If you need different sounds you could create two output sequences for the indicator lights left & right, then trigger the indicator via the additional sound (once/complete) which will start the corresponding sequence (1 or 2). Length of sound file and sequence should be the same so that both stop after x seconds.

Re: Software V 1.3D

Verfasst: Mo 29. Jun 2015, 08:45
von BEIER-Electronic Andy
astecme hat geschrieben:trigger is by proportional channel. Indicator is on for a time period.
If the indicator is on for a defined time period, then this time period have always the same length. I think the easiest way is to adjust the length of the sound with a sound editor and play it once/complete.