Seite 2 von 2

Re: Welchen Fahrregler?

Verfasst: Mi 4. Dez 2013, 22:28
von gismow
Moin, moin...

Der Anschluss am M20+ für das Soundmodul ist nur für Servonaut Module, es ist kein simuliertes Fahrsignal wie z. B. beim E20.

Am M20+ muss man den Mixed Modus über den Motor nehmen.

Greetinx
gismow

Re: Welchen Fahrregler?

Verfasst: Do 5. Dez 2013, 07:32
von BEIER-Electronic Andy
Danke für die Info!

Re: Welchen Fahrregler?

Verfasst: Mo 9. Dez 2013, 14:55
von astecme
The Servonaut SMX sound light unit states that the input for engine sound control can be from a servo input if a normal esc is used OR the output from servonaut units - e.g. M20+. The M20+ works on full stick operation but normal ESC's are only half stick fwds and half reverse. SO I think the input to the SMX is indeed a standard servo input BUT it must detect the "neutral" position at switch on and work accordingly.

If this is true then I think that you should be able to configure the USM-RC2 to work with it by - one the gear /engine sound mapping picture - pull the green zero bar all the way to the left - i.e. so that the full width is forwards. The M20 will give the full range of signal and this ought to work

I HAVE NOT TRIED THIS JUST READ THE MANUALS.