Seite 2 von 2

Re: Servos not working on SM-IR-16-2

Verfasst: Do 28. Jul 2022, 14:42
von BEIER-Electronic Andy
Please record a diagnosis (with data cable or on SD card) while you try to control the servo. Then upload the diagnosis file here.

Re: Servos not working on SM-IR-16-2

Verfasst: Do 28. Jul 2022, 15:56
von BryanBoven
diagnose_RedTruck.dat
(274 KiB) 189-mal heruntergeladen

Re: Servos not working on SM-IR-16-2

Verfasst: Do 28. Jul 2022, 16:23
von Rascal
Hello Bryan,

there is no signal at all on Prop #4 (X2/4)!

Please check the connection between receiver and X2/4 and that the corresponding channel is enabled/working.

Re: Servos not working on SM-IR-16-2

Verfasst: Fr 29. Jul 2022, 01:15
von BryanBoven
Found the issue with a couple of the wires. Everything works normally!! Thanks for all the help!