MSM-1 acting strange - reboot in loop sequence

[Rascal]

Is it just coincidence or does it only happen when you drive in reverse?

[BEIER-Electronic Andy]

did you sent a new one of you fixed the one I sent for repair ?

I sent you a brand new MSM-1 from current production. I had even tested it beforehand (although only for a few minutes).

[Alokocat]

Is it just coincidence or does it only happen when you drive in reverse?

It also happen in forward motion. In one video you can see.

[Alokocat]

did you sent a new one of you fixed the one I sent for repair ?

I sent you a brand new MSM-1 from current production. I had even tested it beforehand (although only for a few minutes).

Well thats too bad then, I feel very unlucky.

Here is a video where I am using the same MSM-1 module but in a completely different model, just to make sure there was no issues with the model itself.
Unfortunately the same problems happens.
also in the video I update the MSM with firmware, retry and same issue.

https://youtu.be/UPPCUk028DA

What do you suggest ?

Dimitri

[BEIER-Electronic Andy]

Thank you for the tests! I'll send you a new MSM-1.

[Alokocat]

Thank you for the tests! I'll send you a new MSM-1.

You're welcome, I just saw the notice from Joana about the new shipment.

I wont be back home before late july but there should be someone to pick up the shipment.
Thanks, hopefully this one will be ok.

Dimitri

[Alokocat]

Thank you for the tests! I'll send you a new MSM-1.

Hello Andy,

I came back from a few weeks working away from home just to find your shipped MSM-1.
I had some time to replace the faulty one with this one and I've been playing around with it for 40 minutes without issues.

that looks promising as the faulty units jsut failed in the first few minutes.
Ill have more time to test it this week and Ill report back to you.

Thanks again fro your support and hopefully this time its gonna work OK.

Dimitri

[Alokocat]

Andy,

after a couple more hours using the MSM1 I had no issues so I guess I was just unfortunate with the previous units.
Crossing fingers and all good now !

Thanks for your support.

Dimitri

[BEIER-Electronic Andy]

I'm glad to hear that