Juwuba Model Scania 770s Light System

[chsw740118@gmail.com]

Hello
Juwuba model I want to use the Scania 770s light system on the sfr-1. As shown in the picture,if you connect the receiver power (1 channel) to the Y jack and connect the power to the light system module,the lights will all turn on. Is there a way to control it?

[Rascal]

Hello,

is that box / module on the right meant for the M24?

If yes there should be a cable assembly with a white connector and 7 open-end wires (6 black, 1 red).
Those wires connect to the outputs of the SFR-1, red goes to Plus.

[chsw740118@gmail.com]

This is the Servonaut m24 version. Of course, there is a cable assembly, and is it possible to control the on/off with all the lights on like now?

[Rascal]

I do not know why all the lights are on. I can only suggest you try it out.

[wampablo]

im currently using these lights on my truck. im not using the m24 box im just hard wiring them using a voltage dropper and connecting the rest of the wires as i would just using leds and resisters.