Cannon elevation with SFR-1-D

Multifunktionsmodul für Modelle mit 2 Antriebsmotoren
Antworten
thuat.bui
Beiträge: 13
Registriert: Do 25. Feb 2021, 02:53

Cannon elevation with SFR-1-D

Beitrag von thuat.bui »

Anybody here successfully configure cannon elevation using servo? I know most of people are using motor for simplicity and natively supported by Beier SFR-1-D. However, I want to use my gimbal module for Gun Stabilization feature. Unfortunately, the component only works with servo, not motor.

Thanks for reading/sharing.
Rascal
Beiträge: 3252
Registriert: Do 9. Okt 2014, 01:31

Re: Cannon elevation with SFR-1-D

Beitrag von Rascal »

Hello,

how do you normally control the gimbal - via switch or stick/potentiometer?

If stick/potentiometer - does it need to latch to hold the cannon in the desired elevation (ignoring the stabilization), or does the stick/potentiometer go back to neutral after selecting the elevation (cannon then remains in that position)?

Do you still have a receiver channel available and a free prop input at the SFR?
thuat.bui
Beiträge: 13
Registriert: Do 25. Feb 2021, 02:53

Re: Cannon elevation with SFR-1-D

Beitrag von thuat.bui »

You're right. I got the problem fixed with assigning the channel to a stick that can hold the position, not automatically return home.

All are fine now!

Thanks a lot
Antworten