Hello,
I'm new here. Anybody successfully connect & configure the Asiatam/Taigen recoil unit with SFR-1-D? Can you please help? I can connect the elevation motor. It's simple. The recoil motor is quite challenge. Any helps would be appricated.
Beier SFR-1-D with Asiatam/Taigen recoil unit
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4150
- Registriert: Mi 17. Dez 2008, 07:37
Re: Beier SFR-1-D with Asiatam/Taigen recoil unit
Hello thuat.bui
can you post a link to the recoil unit?
can you post a link to the recoil unit?
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4150
- Registriert: Mi 17. Dez 2008, 07:37
Re: Beier SFR-1-D with Asiatam/Taigen recoil unit
Sorry, but I have no informations about that unit.
How many pins has the connector with the black, red and green wires? I can't see that in the picture. I would guess there are 3. But that doesn't make any sense to me, since I don't know a 3-pin conector at Taigen.
How many pins has the connector with the black, red and green wires? I can't see that in the picture. I would guess there are 3. But that doesn't make any sense to me, since I don't know a 3-pin conector at Taigen.
Re: Beier SFR-1-D with Asiatam/Taigen recoil unit
It has 03 pins. Similar to Tamiya recoil unit
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4150
- Registriert: Mi 17. Dez 2008, 07:37
Re: Beier SFR-1-D with Asiatam/Taigen recoil unit
The Tamiya recoil unit has other colors:
• green: Battery +
• blue: Battery -
• white: Trigger pulse (0,5 s)
I think this will work similarly with the Asiatam/Taigen recoil unit.
However, there is still a problem with the Tamiya recoil unit if the battery voltage is too high. Here the voltage must be reduced, otherwise the recoil unit will no longer stop. Look here:
https://www.beier-electronic.de/modellb ... =31&t=3087
• green: Battery +
• blue: Battery -
• white: Trigger pulse (0,5 s)
I think this will work similarly with the Asiatam/Taigen recoil unit.
However, there is still a problem with the Tamiya recoil unit if the battery voltage is too high. Here the voltage must be reduced, otherwise the recoil unit will no longer stop. Look here:
https://www.beier-electronic.de/modellb ... =31&t=3087
Re: Beier SFR-1-D with Asiatam/Taigen recoil unit
Thanks, I will test with my tankBEIER-Electronic Andy hat geschrieben: ↑Di 7. Jun 2022, 14:59 The Tamiya recoil unit has other colors:
• green: Battery +
• blue: Battery -
• white: Trigger pulse (0,5 s)
I think this will work similarly with the Asiatam/Taigen recoil unit.
However, there is still a problem with the Tamiya recoil unit if the battery voltage is too high. Here the voltage must be reduced, otherwise the recoil unit will no longer stop. Look here:
https://www.beier-electronic.de/modellb ... =31&t=3087