Grateful for any help please..
SFR-1 fitted a year now - no issues. Stopped working today. On switch on it plays my startup function for about 3 seconds, stops, red led flashes five times, then resets. Repeats this cycle.
Battery is good. No config changes made prior to the failure. In fact it was working fine for about five minutes before it just stopped. Firmware is v1.30c.
Thank you in advance.
Colin
EDIT: Also, USB data connection has failed: can't find / not turned on.. Normally works fine.
UPDATE: Tried reformatting card - no good. Tried a different card - no good. Module just keeps restting aftera couple of seconds. Data cable can't connect.
Any advice appreciated.
SFR-1 stopped working
-
- Beiträge: 23
- Registriert: Fr 29. Jan 2021, 09:05
SFR-1 stopped working
Zuletzt geändert von ColinPT0357 am So 18. Sep 2022, 19:51, insgesamt 1-mal geändert.
Re: SFR-1 stopped working
Hello Colin,
try formatting the SD card via the Sound-Teacher and save the project again to the SD card.
If the problem repeats try another SD card.
try formatting the SD card via the Sound-Teacher and save the project again to the SD card.
If the problem repeats try another SD card.
-
- Beiträge: 23
- Registriert: Fr 29. Jan 2021, 09:05
Re: SFR-1 stopped working
Thanks Rascal. I've tried that and used a different card. It still won't work. What do the 5 red flash leds mean?
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4150
- Registriert: Mi 17. Dez 2008, 07:37
Re: SFR-1 stopped working
Hello Colin,
but the flashing changes when you unplug the SD card?
5 flashes means the processor cannot read a file from the SD card.
If possible, email me the complete contents of the SD card to modellbau@beier-electronic.de
but the flashing changes when you unplug the SD card?
5 flashes means the processor cannot read a file from the SD card.
If possible, email me the complete contents of the SD card to modellbau@beier-electronic.de