Hi
I just tried to copy my truck settings with the k-usb-2 cable but nothing was in my program.
So took out the uSD card but my computer wont recognice it.
The SFR-1 is brand new and truck not even fisished yet.
The uSD card reader I have is ok - have tried with 4 other sd cards
Any suggestions?
Best Regards
Carsten
SFR-1 & SD card not reading
-
- Beiträge: 3
- Registriert: Do 7. Okt 2021, 21:17
- Kontaktdaten:
Re: SFR-1 & SD card not reading
Hello,
when you say the SFR-1 is brandnew, did you ever save a project to that SD card before?
The first time you create a project it must be transferred by SD card to the SFR-1, only then you can use the data cable to transfer, modify or read the configuration.
Please try to format the SD card through the SFR-1 sound teacher (assuming the PC will recognize it), then save the project to the PC and SD card and try again. If that doesn't work the SD card might be faulty, then try another card instead.
when you say the SFR-1 is brandnew, did you ever save a project to that SD card before?
The first time you create a project it must be transferred by SD card to the SFR-1, only then you can use the data cable to transfer, modify or read the configuration.
Please try to format the SD card through the SFR-1 sound teacher (assuming the PC will recognize it), then save the project to the PC and SD card and try again. If that doesn't work the SD card might be faulty, then try another card instead.
-
- Beiträge: 3
- Registriert: Do 7. Okt 2021, 21:17
- Kontaktdaten:
Re: SFR-1 & SD card not reading
Hi
My pc doesn't recognize the card that's first problem. Strange as it's the card supplied with it.
Are truck settings in eeprom/flash and not sd card?
My pc doesn't recognize the card that's first problem. Strange as it's the card supplied with it.
Are truck settings in eeprom/flash and not sd card?
Re: SFR-1 & SD card not reading
Hello,
it is certainly not common but possible that the card is faulty. Do you have the possibility to try it in another PC?
it is certainly not common but possible that the card is faulty. Do you have the possibility to try it in another PC?
The settings are stored on the SD card. However I highly recommend that you save the project to the PC, too, so that you can recover the settings in future if the card is broken or lost.Are truck settings in eeprom/flash and not sd card?
-
- Beiträge: 3
- Registriert: Do 7. Okt 2021, 21:17
- Kontaktdaten:
Re: SFR-1 & SD card not reading
Thanks
I was affraid of that
As my computer crashed and I have no backup...
So back to start with this then.
I was affraid of that
As my computer crashed and I have no backup...
So back to start with this then.