I think these sounds are not available but see post #4 where to search or how to make your own.- Where can I find bucket and boom sounds in the module? As I can see there are only 3 Baggers available and none of them have any sounds for this as I can choose from in the meny.
(I made those file names up for the screenshots, the sounds in the files are actually something else.)
Ok, I see what he is doing, the engine sound can only be switched on/off and doesn't follow the throttle. But he made a mistake by configuring 2 motors with averaging although Prop #2 isn't actually used, so "1 motor for engine sound" (Prop #1) would be sufficent. This would free Prop #2 for other purposes.- I can`t find any info on how to mix ch 10 in the radio for the tracks. Also in the videos I have seen they just assign 9 and 10 to the tracks and they do not do any mixing in the radio. See attached video (from 7min - approx 11 min into the video)
That being said the transmitter has only 6 channels, so I am not sure how he can use ch 7 to 10 !?
In the manual chapter 6.1 it also shows 10 channels.
Mixers are described in chapter 6.8 but they seem to be very simple.
I think you need to figure out how to configure SBUS and how the controls are mapped to the SBUS channels. Since I am not familiar with your transmitter I suggest you search the web or youtube for such information. Or try to contact the guy that made the video you linked.
(I did look in the manual but as you wrote it doesn't say anthing about SBUS configuration.)
You can only set one level under Configuration > Engine sound > Engine sound "Rpm change when triggering function 'Engine sound rpm change':".- For the change of engine idle speed (prop 9) Where do I configure the different % setting of the engine sound for the 3 way switch? For example idle sound at top pos, 20 % increase for mid pos and additional 10 % increase when switch is to the lowest / third position?
Sorry but I can only reply here in the forum. I think it also won't help much as the transmitter configuration needs to be figured out first.Also, would it be easier to Skype or communicate in another way where I maybe can share my desktop so you can see what I do?