Servos not working on SM-IR-16-2
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4140
- Registriert: Mi 17. Dez 2008, 07:37
Re: Servos not working on SM-IR-16-2
Please record a diagnosis (with data cable or on SD card) while you try to control the servo. Then upload the diagnosis file here.
-
- Beiträge: 8
- Registriert: Di 26. Jul 2022, 18:34
Re: Servos not working on SM-IR-16-2
Hello Bryan,
there is no signal at all on Prop #4 (X2/4)!
Please check the connection between receiver and X2/4 and that the corresponding channel is enabled/working.
there is no signal at all on Prop #4 (X2/4)!
Please check the connection between receiver and X2/4 and that the corresponding channel is enabled/working.
-
- Beiträge: 8
- Registriert: Di 26. Jul 2022, 18:34
Re: Servos not working on SM-IR-16-2
Found the issue with a couple of the wires. Everything works normally!! Thanks for all the help!