Servos not working on SM-IR-16-2

Lichtmodule für Auflieger und Anhänger
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4140
Registriert: Mi 17. Dez 2008, 07:37

Re: Servos not working on SM-IR-16-2

Beitrag von BEIER-Electronic Andy »

Please record a diagnosis (with data cable or on SD card) while you try to control the servo. Then upload the diagnosis file here.
BryanBoven
Beiträge: 8
Registriert: Di 26. Jul 2022, 18:34

Re: Servos not working on SM-IR-16-2

Beitrag von BryanBoven »

diagnose_RedTruck.dat
(274 KiB) 73-mal heruntergeladen
Rascal
Beiträge: 3252
Registriert: Do 9. Okt 2014, 01:31

Re: Servos not working on SM-IR-16-2

Beitrag von Rascal »

Hello Bryan,

there is no signal at all on Prop #4 (X2/4)!

Please check the connection between receiver and X2/4 and that the corresponding channel is enabled/working.
BryanBoven
Beiträge: 8
Registriert: Di 26. Jul 2022, 18:34

Re: Servos not working on SM-IR-16-2

Beitrag von BryanBoven »

Found the issue with a couple of the wires. Everything works normally!! Thanks for all the help!
Antworten