Yes, you just need to assign the throttle channel to Prop #1 and the steering channel to Prop #2.
Die Suche ergab 3924 Treffer
- Di 13. Feb 2024, 14:24
- Forum: Soundfahrtregler SFR-1
- Thema: Sfr-1 problem
- Antworten: 10
- Zugriffe: 756
- Di 13. Feb 2024, 07:36
- Forum: Soundfahrtregler SFR-1
- Thema: Sfr-1 problem
- Antworten: 10
- Zugriffe: 756
Re: Sfr-1 problem
Thank you very much for the pictures. But there is nothing noticeable in the pictures. I can't even explain to you theoretically what could trigger such an effect on an SFR-1. All the prop inputs are also almost indestructible. You write that you use S-Bus. Then why do you connect the 2 servo cables...
- Mo 12. Feb 2024, 09:23
- Forum: Soundfahrtregler SFR-1
- Thema: Wiederholt Speicherkarte plötzlich Defekt
- Antworten: 4
- Zugriffe: 334
Re: Wiederholt Speicherkarte plötzlich Defekt
Ich weiß das ist ärgerlich. Hatte ich früher auch mal mit Micro-SD-Karten im Handy. Aber der SFR-1 selber kann meiner Meinung nach keine SD-Karten zerstören. Unsere Module lesen immer nur von der Karte, sie schreiben nichts drauf (außer die Diagnoseaufzeichnung auf SD-Karte ist aktiviert). Durch rei...
- Mo 12. Feb 2024, 08:32
- Forum: Soundfahrtregler SFR-1
- Thema: Sfr-1 problem
- Antworten: 10
- Zugriffe: 756
Re: Sfr-1 problem
Hello Duce606,
can you please check the soldering points of the two servo cables that are soldered to the SFR-1? You can also take a photo of it and upload it here.
can you please check the soldering points of the two servo cables that are soldered to the SFR-1? You can also take a photo of it and upload it here.
- Mo 29. Jan 2024, 13:25
- Forum: Soundmodul USM-RC-3
- Thema: Probleme mit SUMD3
- Antworten: 5
- Zugriffe: 281
Re: Probleme mit SUMD3
Das Projekt sieht soweit gut aus. Wenn die blaue LED schnell blinkt, dann kommt auch ein korrektes SUMD-Signal an. Also theoretisch müsste alles funktionieren. Der nächste Schritt wäre eine Diagnose aufzuzeichnen, dabei ein paar der Digital-Schalter zu drücken und die Diagnose dann hier hochzuladen.
- Mo 29. Jan 2024, 12:09
- Forum: Soundmodul USM-RC-3
- Thema: Probleme mit SUMD3
- Antworten: 5
- Zugriffe: 281
Re: Probleme mit SUMD3
Hallo Martin,
Lade doch mal bitte deine Projektdatei hoch.
Blinkt die blaue LED auf dem USM-RC-3 regelmäßig?
Lade doch mal bitte deine Projektdatei hoch.
Blinkt die blaue LED auf dem USM-RC-3 regelmäßig?
- Fr 26. Jan 2024, 07:42
- Forum: Wünsche, Anregungungen und Verbesserungsvorschläge
- Thema: USM RC-3
- Antworten: 5
- Zugriffe: 964
Re: USM RC-3
Due to the personnel situation in the company, I cannot currently say when I will have time for software updates. Several colleagues here have been out for a long time and it looks like they will continue to be out for a long time. I know you'd like to hear something different, but I really can't pr...
- Mi 24. Jan 2024, 12:53
- Forum: Doppel-Soundfahrtregler SFR-1-HL
- Thema: Machine gun LED not flashing
- Antworten: 9
- Zugriffe: 570
Re: Machine gun LED not flashing
Perfect
- Mi 24. Jan 2024, 07:20
- Forum: Doppel-Soundfahrtregler SFR-1-HL
- Thema: Machine gun LED not flashing
- Antworten: 9
- Zugriffe: 570
Re: Machine gun LED not flashing
Hello Rolf,
yes, output 9 is for the MG LED and output 10 is for the status LED in the turret. If you want this to work exactly like the original, then you have to set the output type here to "Status".
yes, output 9 is for the MG LED and output 10 is for the status LED in the turret. If you want this to work exactly like the original, then you have to set the output type here to "Status".
- Fr 19. Jan 2024, 12:03
- Forum: Doppel-Soundfahrtregler SFR-1-HL
- Thema: SFR-1-HL Probleme nach Setup
- Antworten: 12
- Zugriffe: 526
Re: SFR-1-HL Probleme nach Setup
Die Ansteuerung für die MG-LED kommt also vom Turm-Stecker X6. Das ist beim SFR-1-HL der Ausgang 9. Wenn dieser Ausgang zusammen mit dem Zusatzsound 3 aktiviert werden soll, dann musst den den Ausgang 9 bei dem Zusatzsound anhaken: SFR-1-HL_MG_1.png Du verwendest "maschinengewehr.wav" al...