Die Suche ergab 3063 Treffer
- Fr 19. Apr 2024, 18:51
- Forum: Soundfahrtregler SFR-1
- Thema: Motorgeräusch wechselt im Fahrbetrieb
- Antworten: 6
- Zugriffe: 51
- Fr 19. Apr 2024, 16:19
- Forum: Soundfahrtregler SFR-1
- Thema: Motorgeräusch wechselt im Fahrbetrieb
- Antworten: 6
- Zugriffe: 51
Re: Motorgeräusch wechselt im Fahrbetrieb
Hallo Siggi,
du kannst ja erstmal versuchen die Karte zu formatieren und das Projekt neu zu speichern.
Vorher aber unbedingt auf dem PC speichern (ggfs. erst importieren) wenn noch nicht gemacht, ansonsten ist nach dem Formatieren alles weg.
Zur SD Karte siehe hier.
du kannst ja erstmal versuchen die Karte zu formatieren und das Projekt neu zu speichern.
Vorher aber unbedingt auf dem PC speichern (ggfs. erst importieren) wenn noch nicht gemacht, ansonsten ist nach dem Formatieren alles weg.
Zur SD Karte siehe hier.
- Sa 13. Apr 2024, 14:24
- Forum: Soundfahrtregler SFR-1
- Thema: Set-up not possible
- Antworten: 11
- Zugriffe: 171
Re: Set-up not possible
Will the receiver power up when connected to Prop #5 (or 4 or 3)?
- Fr 12. Apr 2024, 23:56
- Forum: Soundfahrtregler SFR-1
- Thema: Set-up not possible
- Antworten: 11
- Zugriffe: 171
- Fr 12. Apr 2024, 23:53
- Forum: Soundfahrtregler SFR-1
- Thema: Set-up not possible
- Antworten: 11
- Zugriffe: 171
Re: Set-up not possible
Nothing else connected to SFR but the receiver and powerd over bench powersupply Not a good idea - bench power supplies will have ripple voltages that may be harmful to electronics which are designed to be powered by battery only, like most RC components. As such I suggest not to use a bench power ...
- Fr 12. Apr 2024, 21:36
- Forum: Soundfahrtregler SFR-1
- Thema: Set-up not possible
- Antworten: 11
- Zugriffe: 171
Re: Set-up not possible
But when I powered up supply current jumped to 0.45 A and no led on SFR on Ist there any other ESC with BEC connected to the receiver, or a receiver battery or an external BEC? If yes you must ensure that only one BEC is active by disconnecting the red wire from the servo cable of other ESC(s), i.e...
- Fr 12. Apr 2024, 17:53
- Forum: Soundfahrtregler SFR-1
- Thema: Motor anschließen
- Antworten: 7
- Zugriffe: 111
Re: Motor anschließen
Hallo Mike,
Silikonkabel hochflexibel 1,5mm².
Silikonkabel hochflexibel 1,5mm².
- Fr 12. Apr 2024, 00:49
- Forum: Soundfahrtregler SFR-1
- Thema: Set-up not possible
- Antworten: 11
- Zugriffe: 171
Re: Set-up not possible
Hello Scrooge, When I push the setup button: Green led: flashes fast Blue becomes red and constant on. This indicates a problem with the throttle signal. First check if the throttle cable (X2/1) is still correctly soldered to the SFR-1, maybe one of the wires broke at the soldering point. You didn't...
- Do 11. Apr 2024, 21:01
- Forum: Soundfahrtregler SFR-1
- Thema: Motor anschließen
- Antworten: 7
- Zugriffe: 111
Re: Motor anschließen
Hallo, achso, du meintest die Kabel vom SFR-1. Das sind keine Steckverbinder sondern einfach nur Aderendhülsen , diese sind z.B. bei Schraub- oder Lüsterklemmen nötig wenn das Kabel mehrdrähtig ist. (Bitte keine Lüsterklemmen im Modellbau verwenden.) Würde ich abschneiden und gegen XT60 o.ä. tauschen.
- Do 11. Apr 2024, 12:31
- Forum: Soundfahrtregler SFR-1
- Thema: Motor anschließen
- Antworten: 7
- Zugriffe: 111
Re: Motor anschließen
Hallo Mike, sind das die Stecker wie hier gezeigt ? Dann handelt es sich um sogenannte Japan-Stecker oder auch Bullet Stecker, bekommst du z.B. hier oder hier . Ansonsten bitte mal ein Foto machen und hier hochladen. Alternativ die Kabel vom SFR-1 direkt am Motor anlöten oder eine hochwertige, verpo...