OK
Thnx
Die Suche ergab 16 Treffer
- Mi 24. Apr 2024, 20:54
- Forum: Soundfahrtregler SFR-1
- Thema: max power servo output
- Antworten: 2
- Zugriffe: 2497
- Mi 24. Apr 2024, 12:20
- Forum: Soundfahrtregler SFR-1
- Thema: max power servo output
- Antworten: 2
- Zugriffe: 2497
max power servo output
What is the max power supply from the servo outputs?
Reason of the question
Not to power a servo but I would use it to power 8 adressable leds (max 480mA total) at 5V
Reason of the question
Not to power a servo but I would use it to power 8 adressable leds (max 480mA total) at 5V
- So 14. Apr 2024, 09:48
- Forum: Soundfahrtregler SFR-1
- Thema: Set-up not possible
- Antworten: 11
- Zugriffe: 28602
Re: Set-up not possible
Succes Powered receiver from prop 3 / 4 /5 as requested =OK Put back in 6 and had power ! ???? Performed set-up again with only prop 6 connected (SBUS in project activated) and had succes Don't know why Connected aditionally (test) other SFR prop channels + prop 6 > normal power consumption 0.14 Thn...
- Sa 13. Apr 2024, 09:23
- Forum: Soundfahrtregler SFR-1
- Thema: Set-up not possible
- Antworten: 11
- Zugriffe: 28602
Re: Set-up not possible
Used bench power supply to monitor power consumption and prevend dammage to SFR
will start using batt further on
Also using other port on receiver will not powerup the receiver from x2/6
Yes using correct SBUS port on receiver (see pictures)
note: Nano is not connected
will start using batt further on
Also using other port on receiver will not powerup the receiver from x2/6
Yes using correct SBUS port on receiver (see pictures)
note: Nano is not connected
- Sa 13. Apr 2024, 09:03
- Forum: Soundfahrtregler SFR-1
- Thema: Set-up not possible
- Antworten: 11
- Zugriffe: 28602
Re: Set-up not possible
Sorry
was constantly saving modified projects to SD card and probably forgot to save latetst version to PC
Attached correct version
was constantly saving modified projects to SD card and probably forgot to save latetst version to PC
Attached correct version
- Fr 12. Apr 2024, 22:00
- Forum: Soundfahrtregler SFR-1
- Thema: Set-up not possible
- Antworten: 11
- Zugriffe: 28602
Re: Set-up not possible
This is latest version of project with sbus disabled
- Fr 12. Apr 2024, 21:56
- Forum: Soundfahrtregler SFR-1
- Thema: Set-up not possible
- Antworten: 11
- Zugriffe: 28602
Re: Set-up not possible
Nothing else connected to SFR but the receiver and powerd over bench powersupply Disabling "brake function" solved the problem on only driving one direction thnx Performing the diagnostic as discribed is not possible as SBUS is not powering the reveiver As soon as ch1 or ch2 are connected ...
- Fr 12. Apr 2024, 21:17
- Forum: Soundfahrtregler SFR-1
- Thema: Set-up not possible
- Antworten: 11
- Zugriffe: 28602
Re: Set-up not possible
I followed the suggestion to only connect SBUS Setup procedure succeeded but…. Steering OK (L+R) but motor only in one direction So the same problem as user SNIFV8 had 31 may 2020 Led:Green flashing and red constant on Disabled SBUS in the project and connected CH1+2 (std connection) When powered up...
- Do 11. Apr 2024, 22:26
- Forum: Soundfahrtregler SFR-1
- Thema: Set-up not possible
- Antworten: 11
- Zugriffe: 28602
Set-up not possible
I came across a similar problem on the forum but with no clear solution (unless I missed one) Transmitter: Taranis Q X7 Receiver: FRSKY X8R Throttle: CH1 / Steering: CH2 Note: combination of these works fine on my USM-RC-2 When I powerup the SFR: Blue led : flashes 3x fast Green led : flashes slowly...
- Mi 11. Dez 2019, 20:21
- Forum: Soundfahrtregler SFR-1
- Thema: K-USB-2 installation
- Antworten: 2
- Zugriffe: 3306
Re: K-USB-2 installation
Ok
Will see what happens when I start installing .
Thnx
Will see what happens when I start installing .
Thnx