Sorry for taken so long to get back to this.
Yes everything is working as expected. It was use error, motors work better when connected. All sounds and motor work as expected.
Thank you very much for the help. I will always recommend product that have good support behind them.
Die Suche ergab 11 Treffer
- So 16. Apr 2023, 18:33
- Forum: Soundfahrtregler SFR-1
- Thema: SBus fails on teach/setup
- Antworten: 20
- Zugriffe: 2389
- Do 6. Apr 2023, 00:54
- Forum: Soundfahrtregler SFR-1
- Thema: SBus fails on teach/setup
- Antworten: 20
- Zugriffe: 2389
Re: SBus fails on teach/setup
Some progress has happened. I set the receiver and SFR-1 to I-bus. Now the throttle will change the engine sounds but still no motor movement. I have attached the diagnose recording. In the recording the throttle start at 0% and goes to 100% and then down to -100% with finally going back to 0%. Look...
- Di 4. Apr 2023, 19:35
- Forum: Soundfahrtregler SFR-1
- Thema: SBus fails on teach/setup
- Antworten: 20
- Zugriffe: 2389
Re: SBus fails on teach/setup
As there seems to be a limit to the number of files that can be attached here is the test files for when I enable the sound. For runs with sound 1. Prop 3 100% for 3 seconds to enable sound 2. Prop 3 back to 0% 3. Throttle/prop 1 start at 0% 4. Throttle slowly move to 100% 5. Throttle hold 100% 6. T...
- Di 4. Apr 2023, 19:34
- Forum: Soundfahrtregler SFR-1
- Thema: SBus fails on teach/setup
- Antworten: 20
- Zugriffe: 2389
Re: SBus fails on teach/setup
Attached is the diagnosis data from the SFR-1 in normal operational mode as asked for. I took two reads of both test/setups I did. For all runs the LEDs are as follows. Green: slow flash Red: off Blue: fast flash Runs with no sound turned on: 1. Throttle/prop 1 start at 0% 2. Throttle slowly move to...
- Mo 3. Apr 2023, 21:31
- Forum: Soundfahrtregler SFR-1
- Thema: SBus fails on teach/setup
- Antworten: 20
- Zugriffe: 2389
Re: SBus fails on teach/setup
I think there might be some confusion here.
The diagnosis tool does show input on prop 1 but it never triggers any motor movement or sounds base on the movement.
Would it be worth while for me to record a short video of what happens when using sbus compared to pwm.
The diagnosis tool does show input on prop 1 but it never triggers any motor movement or sounds base on the movement.
Would it be worth while for me to record a short video of what happens when using sbus compared to pwm.
- Sa 1. Apr 2023, 13:44
- Forum: Soundfahrtregler SFR-1
- Thema: SBus fails on teach/setup
- Antworten: 20
- Zugriffe: 2389
Re: SBus fails on teach/setup
It is like there is no output on prop 1, The motor does not turn and the engine sound affects do not rev like they should. Every other prop works as expected.
If I use a pwm receiver the prop 1 works as expected. The problem only affects prop 1 when using Sbus.
If I use a pwm receiver the prop 1 works as expected. The problem only affects prop 1 when using Sbus.
- Do 30. Mär 2023, 21:28
- Forum: Soundfahrtregler SFR-1
- Thema: SBus fails on teach/setup
- Antworten: 20
- Zugriffe: 2389
Re: SBus fails on teach/setup
Sure no problem.
I recorded it twice using the cable.
I recorded it twice using the cable.
- Mi 29. Mär 2023, 19:46
- Forum: Soundfahrtregler SFR-1
- Thema: SBus fails on teach/setup
- Antworten: 20
- Zugriffe: 2389
Re: SBus fails on teach/setup
I tried swapping the channels. This gave the same outcome. This is how the LEDs acted during the teach. SFR-1 on (not in teach mode) Green = Slow flash, Red = off, Blue = Fast flash Teach mode active Green = Fast flash, Red = off, Blue = off Throttle up for 2 seconds Throttle return to centre Green ...
- Di 28. Mär 2023, 21:02
- Forum: Soundfahrtregler SFR-1
- Thema: SBus fails on teach/setup
- Antworten: 20
- Zugriffe: 2389
Re: SBus fails on teach/setup
Sure no problem.
Attached file is simplest I could make it. Both props 2 & 3 work as expected.
Prop 1 does not trigger any motor action.
Attached file is simplest I could make it. Both props 2 & 3 work as expected.
Prop 1 does not trigger any motor action.
- Di 28. Mär 2023, 19:58
- Forum: Soundfahrtregler SFR-1
- Thema: SBus fails on teach/setup
- Antworten: 20
- Zugriffe: 2389
Re: SBus fails on teach/setup
I have done that. The set up works with an non Sbus receiver. Sounds, lights and drive motor all work. The problem is when switched to SBus prop 1 does not work any more and the teach function fails.
How can I debug this issue?
How can I debug this issue?