BEIER-Electronic

Wir kennen das Tamiya-Protokoll nicht, daher können wir es nicht einbauen. Generell hält sich aber die Nachfrage nach Battle-Units seeeehhhhhr in Grenzen. Daher ist hier aktuelle auch nichts weiter geplant. I believe the demand is quite large, certainly not for Beier's users. If you see the market ...

What are you trying to achieve? Separately control the flash for 02 cannons? If that's the case, I have a simple solution with a remote relay switch. Exactly the same diagram, just replace the relay 500ms by remote relay switch (control by your transmitter), you can switch over the 02 cannons. Hallo...

Hello Thuat, I know the problem. Unfortunately, it is currently not possible to do this with the SFR-1-D. I don't know if there will be a software update for this at some point. Thanks Andy for the feedback. I have my workaround by combining programing feature of the radio controller and one relay ...

Hi Beier team, As you known, many modern tanks (Leo2, M1, CH2...) will lift the gun up to push away the empty shell. I'm using servo feature from Beier SFR-1-D to lift the gun. However, the servo output needs to assign to either a fixed channel, or fixed positions (04 positions + home) or a sequence...

It's work for me now with your instruction. Thanks a lot! Very quick and helpful support.

This is the last screenshot and configuration .sfr-1-d file

Hi everybody, It's me a gain with new issue. I'm configuring now the MG1 & 2. I have issue with LED light2 of MG1 + 2 are flashing at the same time. This is the configuration. I actually don't understand the number in Option 1 for Output 1 (5) & Output 2 (10) MG_1n2_config_1.jpg MG_1n2_confi...

You're right. I got the problem fixed with assigning the channel to a stick that can hold the position, not automatically return home.

All are fine now!

Thanks a lot

The Tamiya recoil unit has other colors: • green: Battery + • blue: Battery - • white: Trigger pulse (0,5 s) I think this will work similarly with the Asiatam/Taigen recoil unit. However, there is still a problem with the Tamiya recoil unit if the battery voltage is too high. Here the voltage must ...

Anybody here successfully configure cannon elevation using servo? I know most of people are using motor for simplicity and natively supported by Beier SFR-1-D. However, I want to use my gimbal module for Gun Stabilization feature. Unfortunately, the component only works with servo, not motor. Thanks...