Die Suche ergab 4 Treffer

von OlaNormann
Mi 4. Jan 2017, 21:56
Forum: Erweiterungsmodul EXM-2
Thema: Problem with switching outputs (X13) on EXM-2
Antworten: 8
Zugriffe: 10519

Re: Problem with switching outputs (X13) on EXM-2

Finally the EXM-2 works fine! The minuses was checked afterwards and it work both when they were connected and when they were apart. The only thing I did before the outputs started working, was to define outputs (in the software) for the different lanterns. I had previously only defined switches for...
von OlaNormann
Fr 30. Dez 2016, 15:16
Forum: Erweiterungsmodul EXM-2
Thema: Problem with switching outputs (X13) on EXM-2
Antworten: 8
Zugriffe: 10519

Re: Problem with switching outputs (X13) on EXM-2

I will test the voltages on sunday.

We use 2 batteries, one for the modules og and one for the receiver. The minuses are not connected.
Strangely the USM-RC-2 outputs work fine, but not the EXM-2 outputs.
von OlaNormann
Do 29. Dez 2016, 20:45
Forum: Erweiterungsmodul EXM-2
Thema: Problem with switching outputs (X13) on EXM-2
Antworten: 8
Zugriffe: 10519

Re: Problem with switching outputs (X13) on EXM-2

I am sorry, I have drawn the diode the wrong way. It is of course mounted correct. The diode is red and ready made for 6V with a resistor hidden behind a shrink tube.... We have also tried relays (of course with freewheeling diodes), = "8K-Relais Platine" from CP Elektronik. The diode and ...
von OlaNormann
Do 29. Dez 2016, 13:40
Forum: Erweiterungsmodul EXM-2
Thema: Problem with switching outputs (X13) on EXM-2
Antworten: 8
Zugriffe: 10519

Problem with switching outputs (X13) on EXM-2

We are 4 persons that wish to use USM-RC-2 in connection with EXM-2 on our ship models in order to control several functions on the models. When all is wired as described in picture, and all components are switched on, the blue LEDs flash as expected. When the switch on transmitter (NMS-16-G) is act...