EXM-2/USM-RC-2/UFR-1230/SM-IR-16-2

Das Erweiterungsmodul für unser Soundmodul USM-RC-2
Benutzeravatar
micwic
Beiträge: 19
Registriert: Sa 13. Aug 2011, 17:06
Wohnort: Dalbyneder, Denmark
Kontaktdaten:

Re: EXM-2/USM-RC-2/UFR-1230/SM-IR-16-2

Beitrag von micwic »

Thanks Rascal
It would be Nice with a instruction/manual for at complet system setup
Benutzeravatar
micwic
Beiträge: 19
Registriert: Sa 13. Aug 2011, 17:06
Wohnort: Dalbyneder, Denmark
Kontaktdaten:

Re: EXM-2/USM-RC-2/UFR-1230/SM-IR-16-2

Beitrag von micwic »

Sorry me again, after the recent firmware update I have become a little confused,
I cant now use both Digital UFR profile and simultaneously use my EXM-2 module as I see it, now its connected to a patch cable from UFR-1230 to X12-1 on EXM-2 and from EXM-2 a cable from x12-S to X2-1 at USM RC2, is there anything I need to change, according to the new manual is only necessary with a patch cable from UFR 1230 directly to X2-1 on USM-rc2 but how do I then get my needed extra 6 canals on my EXM-2 modul.

Sorry if its a silly question but I cant get my head around it
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4140
Registriert: Mi 17. Dez 2008, 07:37

Re: EXM-2/USM-RC-2/UFR-1230/SM-IR-16-2

Beitrag von BEIER-Electronic Andy »

If you have an EXM-2, you can't use the "digital communication" between UFR and USM. Because both have to be connected to X2/1 at the USM...
Benutzeravatar
micwic
Beiträge: 19
Registriert: Sa 13. Aug 2011, 17:06
Wohnort: Dalbyneder, Denmark
Kontaktdaten:

Re: EXM-2/USM-RC-2/UFR-1230/SM-IR-16-2

Beitrag von micwic »

Thank you
Antworten