Die Suche ergab 3924 Treffer

von BEIER-Electronic Andy
Di 13. Feb 2024, 14:24
Forum: Soundfahrtregler SFR-1
Thema: Sfr-1 problem
Antworten: 10
Zugriffe: 756

Re: Sfr-1 problem

Yes, you just need to assign the throttle channel to Prop #1 and the steering channel to Prop #2.
Throttle and steering via S-Bus.png
Throttle and steering via S-Bus.png (13.54 KiB) 619 mal betrachtet
von BEIER-Electronic Andy
Di 13. Feb 2024, 07:36
Forum: Soundfahrtregler SFR-1
Thema: Sfr-1 problem
Antworten: 10
Zugriffe: 756

Re: Sfr-1 problem

Thank you very much for the pictures. But there is nothing noticeable in the pictures. I can't even explain to you theoretically what could trigger such an effect on an SFR-1. All the prop inputs are also almost indestructible. You write that you use S-Bus. Then why do you connect the 2 servo cables...
von BEIER-Electronic Andy
Mo 12. Feb 2024, 09:23
Forum: Soundfahrtregler SFR-1
Thema: Wiederholt Speicherkarte plötzlich Defekt
Antworten: 4
Zugriffe: 334

Re: Wiederholt Speicherkarte plötzlich Defekt

Ich weiß das ist ärgerlich. Hatte ich früher auch mal mit Micro-SD-Karten im Handy. Aber der SFR-1 selber kann meiner Meinung nach keine SD-Karten zerstören. Unsere Module lesen immer nur von der Karte, sie schreiben nichts drauf (außer die Diagnoseaufzeichnung auf SD-Karte ist aktiviert). Durch rei...
von BEIER-Electronic Andy
Mo 12. Feb 2024, 08:32
Forum: Soundfahrtregler SFR-1
Thema: Sfr-1 problem
Antworten: 10
Zugriffe: 756

Re: Sfr-1 problem

Hello Duce606,

can you please check the soldering points of the two servo cables that are soldered to the SFR-1? You can also take a photo of it and upload it here.
von BEIER-Electronic Andy
Mo 29. Jan 2024, 13:25
Forum: Soundmodul USM-RC-3
Thema: Probleme mit SUMD3
Antworten: 5
Zugriffe: 281

Re: Probleme mit SUMD3

Das Projekt sieht soweit gut aus. Wenn die blaue LED schnell blinkt, dann kommt auch ein korrektes SUMD-Signal an. Also theoretisch müsste alles funktionieren. Der nächste Schritt wäre eine Diagnose aufzuzeichnen, dabei ein paar der Digital-Schalter zu drücken und die Diagnose dann hier hochzuladen.
von BEIER-Electronic Andy
Mo 29. Jan 2024, 12:09
Forum: Soundmodul USM-RC-3
Thema: Probleme mit SUMD3
Antworten: 5
Zugriffe: 281

Re: Probleme mit SUMD3

Hallo Martin,

Lade doch mal bitte deine Projektdatei hoch.

Blinkt die blaue LED auf dem USM-RC-3 regelmäßig?
von BEIER-Electronic Andy
Fr 26. Jan 2024, 07:42
Forum: Wünsche, Anregungungen und Verbesserungsvorschläge
Thema: USM RC-3
Antworten: 5
Zugriffe: 964

Re: USM RC-3

Due to the personnel situation in the company, I cannot currently say when I will have time for software updates. Several colleagues here have been out for a long time and it looks like they will continue to be out for a long time. I know you'd like to hear something different, but I really can't pr...
von BEIER-Electronic Andy
Mi 24. Jan 2024, 07:20
Forum: Doppel-Soundfahrtregler SFR-1-HL
Thema: Machine gun LED not flashing
Antworten: 9
Zugriffe: 570

Re: Machine gun LED not flashing

Hello Rolf,

yes, output 9 is for the MG LED and output 10 is for the status LED in the turret. If you want this to work exactly like the original, then you have to set the output type here to "Status".
 
SFR-1-HL Output 9_10.png
SFR-1-HL Output 9_10.png (12.22 KiB) 535 mal betrachtet
von BEIER-Electronic Andy
Fr 19. Jan 2024, 12:03
Forum: Doppel-Soundfahrtregler SFR-1-HL
Thema: SFR-1-HL Probleme nach Setup
Antworten: 12
Zugriffe: 526

Re: SFR-1-HL Probleme nach Setup

Die Ansteuerung für die MG-LED kommt also vom Turm-Stecker X6. Das ist beim SFR-1-HL der Ausgang 9. Wenn dieser Ausgang zusammen mit dem Zusatzsound 3 aktiviert werden soll, dann musst den den Ausgang 9 bei dem Zusatzsound anhaken: SFR-1-HL_MG_1.png   Du verwendest "maschinengewehr.wav" al...