Die Suche ergab 3061 Treffer
- Sa 13. Apr 2024, 14:24
- Forum: Soundfahrtregler SFR-1
- Thema: Set-up not possible
- Antworten: 11
- Zugriffe: 164
Re: Set-up not possible
Will the receiver power up when connected to Prop #5 (or 4 or 3)?
- Fr 12. Apr 2024, 23:56
- Forum: Soundfahrtregler SFR-1
- Thema: Set-up not possible
- Antworten: 11
- Zugriffe: 164
- Fr 12. Apr 2024, 23:53
- Forum: Soundfahrtregler SFR-1
- Thema: Set-up not possible
- Antworten: 11
- Zugriffe: 164
Re: Set-up not possible
Nothing else connected to SFR but the receiver and powerd over bench powersupply Not a good idea - bench power supplies will have ripple voltages that may be harmful to electronics which are designed to be powered by battery only, like most RC components. As such I suggest not to use a bench power ...
- Fr 12. Apr 2024, 21:36
- Forum: Soundfahrtregler SFR-1
- Thema: Set-up not possible
- Antworten: 11
- Zugriffe: 164
Re: Set-up not possible
But when I powered up supply current jumped to 0.45 A and no led on SFR on Ist there any other ESC with BEC connected to the receiver, or a receiver battery or an external BEC? If yes you must ensure that only one BEC is active by disconnecting the red wire from the servo cable of other ESC(s), i.e...
- Fr 12. Apr 2024, 17:53
- Forum: Soundfahrtregler SFR-1
- Thema: Motor anschließen
- Antworten: 7
- Zugriffe: 110
Re: Motor anschließen
Hallo Mike,
Silikonkabel hochflexibel 1,5mm².
Silikonkabel hochflexibel 1,5mm².
- Fr 12. Apr 2024, 00:49
- Forum: Soundfahrtregler SFR-1
- Thema: Set-up not possible
- Antworten: 11
- Zugriffe: 164
Re: Set-up not possible
Hello Scrooge, When I push the setup button: Green led: flashes fast Blue becomes red and constant on. This indicates a problem with the throttle signal. First check if the throttle cable (X2/1) is still correctly soldered to the SFR-1, maybe one of the wires broke at the soldering point. You didn't...
- Do 11. Apr 2024, 21:01
- Forum: Soundfahrtregler SFR-1
- Thema: Motor anschließen
- Antworten: 7
- Zugriffe: 110
Re: Motor anschließen
Hallo, achso, du meintest die Kabel vom SFR-1. Das sind keine Steckverbinder sondern einfach nur Aderendhülsen , diese sind z.B. bei Schraub- oder Lüsterklemmen nötig wenn das Kabel mehrdrähtig ist. (Bitte keine Lüsterklemmen im Modellbau verwenden.) Würde ich abschneiden und gegen XT60 o.ä. tauschen.
- Do 11. Apr 2024, 12:31
- Forum: Soundfahrtregler SFR-1
- Thema: Motor anschließen
- Antworten: 7
- Zugriffe: 110
Re: Motor anschließen
Hallo Mike, sind das die Stecker wie hier gezeigt ? Dann handelt es sich um sogenannte Japan-Stecker oder auch Bullet Stecker, bekommst du z.B. hier oder hier . Ansonsten bitte mal ein Foto machen und hier hochladen. Alternativ die Kabel vom SFR-1 direkt am Motor anlöten oder eine hochwertige, verpo...
- Mo 8. Apr 2024, 13:01
- Forum: Soundmodul USM-RC-3
- Thema: Nutzung der Servo Ausgänge für Bewegungsabläufe
- Antworten: 1
- Zugriffe: 143
Re: Nutzung der Servo Ausgänge für Bewegungsabläufe
Hallo, das wird leider nicht gehen, entweder werden die Servo-Ausgänge über eine Funktions-Sequenz gesteuert oder über die Lenkung (= direkte Steuerung). Es ist nicht möglich zwischen Sequenz und Lenkung umzuschalten oder die direkte Steuerung über die Lenkung zeitlich zu begrenzen. Ich denke das kö...
- Mo 8. Apr 2024, 12:39
- Forum: Soundfahrtregler SFR-1
- Thema: Hilfe bei SFR-Programmieren
- Antworten: 12
- Zugriffe: 650
Re: Hilfe bei SFR-Programmieren
Hallo Raphael, Funktioniert das auf den Steckplätzen 14/15 vom IR 16-2 auch? Diese Ausänge sind ja eigentlich für Sonderfunktionen und keine 1/1 kopien vom SFR? Das wird nicht funktionieren, da wie du sagst die Ausgänge nicht über den SFR-1 direkt gesteuert werden sondern nur für die Licht-Sonderfun...